wishbones

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
wishbones
#1
Hi all , I need to replace my wishbones and ball joints motoquip, lemforder, meyle or do I need to spend more and get Peugeot. Any thoughts . many thanks in advance.
Reply
Thanks given by:
#2
Lemforder will be good enough I'm sure Smile
Phase 1 D-Turdo, K14@24 psi, De-cat, meaty backbox, Bosch pump, grinded LDA pin, duel air fed K&N =133.7bhp & 188ft/lbs
Reply
Thanks given by: ripp444
#3
how much power are you running / are you running silly low on the front?

Meyle Hd should be more than enough for a decent set of lower arms, guaranteed for 4 years too - I'm saying this despite ruining the p-bushes, but I am running a lot of torque through the front.

I'd avoid anything from ebay, and even from some motorfactors like ecp, gsf, carparts4less ..etc

I've had not so cheap pattern parts from big motorfactors fail - pbush pin snapping off for example was not great news.

If you're running lower than say 30/40mm you prob want to adjust the p-bush angle anyway as there will more strain on them in their standard orientation.
Reply
Thanks given by: ripp444
#4
(22-04-2015, 09:11 AM)zx_volcane Wrote: how much power are you running / are you running silly low on the front?

Meyle Hd should be more than enough for a decent set of lower arms, guaranteed for 4 years too - I'm saying this despite ruining the p-bushes, but I am running a lot of torque through the front.

I'd avoid anything from ebay, and even from some motorfactors like ecp, gsf, carparts4less ..etc

I've had not so cheap pattern parts from big motorfactors fail - pbush pin snapping off for example was not great news.

If you're running lower than say 30/40mm you prob want to adjust the p-bush angle anyway as there will more strain on them in their standard orientation.

No just standard height and power. Gti6
Reply
Thanks given by:
#5
Anybody know where to get meyle , and am I right in thinking they come with the ball joints.
Reply
Thanks given by:
#6
ebay via mick's garage i think are the cheapest - but they're based in ireland, which as i'm finding out making a claim on warranty is a bit of an ordeal

theres prob a decent uk based supplier too
Reply
Thanks given by:
#7
Lemforder stuff is pretty damn good for oem.
306 HDi Deathtrap - 130bhp / 220lbft
...UPGRADING...



Reply
Thanks given by: ripp444
#8
I bought some eBay shit that came with all the bushes for £30...they snapped on the arm and collapsed the o/s, missus was lucky as it snapped when she pulled up on a driveway! Lemforder for the win! Buy cheap, buy again I say Wink
[Image: 9fa12c59-0c3d-4413-968d-6a7840ff068f.jpg]
Stage 1 HDi DTurbo Diablo 5dr, "Dee-Dee"
Reply
Thanks given by: ripp444
#9
http://www.expresscarparts.co.uk

This is where i got my Meyle HD bones from. May be worth phoning them and having a word as i think i paid less than they are on the website for.
Team Eaton


1999 China Blue 306 GTi6 - Eaton Supercharged - 214.5bhp 181lbft
Reply
Thanks given by: ripp444


Possibly Related Threads…
Thread Author Replies Views Last Post
  wishbones procta 18 3,966 05-04-2016, 03:55 PM
Last Post: pug306driver
  Wishbones ripp444 0 937 05-06-2015, 12:43 PM
Last Post: ripp444
  Wishbones. Dean 23 8,368 01-03-2014, 07:00 PM
Last Post: Razorback_Rob

Forum Jump:


Users browsing this thread: 2 Guest(s)