Inspiration needed

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Inspiration needed
#1
So love my 306 but looking to do something different with it. I'm thinking of putting white banded steels on it. What else do you think I could do to it? Inside and out. 
[attachment=22383]

[attachment=22384]

[attachment=22385]

[attachment=22386]
Reply
Thanks given by:
#2
You'll have to go low to make banded steels work imo. But it'll look good!

And if it were me I'd go standard rear spoiler & maybe de lock the doors?
CLUB RALLYE
||AVO Race GTX Coilovers||Signature Blue Steels||P1 VTS Rack||Hybrid ARB||21mm Torsion Bar||rich_w Flywheel||
Reply
Thanks given by:
#3
Black masks
Reply
Thanks given by:
#4
(24-03-2015, 09:51 PM)Orta Wrote: You'll have to go low to make banded steels work imo. But it'll look good!

And if it were me I'd go standard rear spoiler & maybe de lock the doors?

It's on Coilovers on the front and will be replacing the axle soon so hopefully I can get it to sit right Smile

(24-03-2015, 09:55 PM)Iceman299 Wrote: Black masks

Will be black masking the new set of lights I'm getting Smile
Reply
Thanks given by:
#5
If you go banded steels route you'd have to go for a standard spoiler. Banded steels would be good though
Reply
Thanks given by:
#6
(24-03-2015, 10:10 PM)JJ0063 Wrote: If you go banded steels route you'd have to go for a standard spoiler. Banded steels would be good though

I really like the spoiler haha RD managed to pull it off
[attachment=22387]
Reply
Thanks given by:
#7
Some hockey stick clips would be a good start too Wink
Reply
Thanks given by:
#8
(24-03-2015, 10:44 PM)Iceman299 Wrote: Some hockey stick clips would be a good start too Wink

Haha Yeah they are needed Wink
Reply
Thanks given by:
#9
get a splitter and make your exhaust fit in the cut out would be a start.

Maybe a set of 17" steels as they were only about £50 each brand new last time i checked.
Reply
Thanks given by:
#10
(25-03-2015, 10:13 AM)Dum-Dum Wrote: get a splitter and make your exhaust fit in the cut out would be a start.

Maybe a set of 17" steels as they were only about £50 each brand new last time i checked.

Yeah I'm after a splitter and a new exhaust system. Want a straight through system. I want these 16" steels and band them Smile http://pages.ebay.com/link/?nav=item.vie...1794752520 
Reply
Thanks given by:
#11
Nah 17" steels like this
https://www.flickr.com/photos/markcrossl...485775781/

Trying to find more pics of this car to show you properly but it's probing elusive.
Reply
Thanks given by:
#12
(25-03-2015, 10:29 AM)Dum-Dum Wrote: Nah 17" steels like this
https://www.flickr.com/photos/markcrossl...485775781/

Trying to find more pics of this car to show you properly but it's probing elusive.

They look pretty decent Smile
Reply
Thanks given by:
#13
Remove your illegal tints on the front windows? Sorry its a pet hate of mine Wink

Otherwise I quite like the white 'clones. Everyone tries to go banded steels but few actually pull it off well...
I'd make it lighter and put on significantly lighter wheels/tyres etc. If you are going to the cost anyway you might as well make it quicker Smile
P1 XSi track car
2.4 LWB T4
Reply
Thanks given by:
#14
IMO it looks great and the subtle mods you've already done are good and it'd be ruined with blantant, OTT stuff.
This post is an artistic work of fiction and falsehood. Only a fool would take anything posted above as fact.

62k Diablo Phase 1 Gti-6:
Project Thread
Reply
Thanks given by:
#15
Think it looks good as is tbh, give her a wash you dirty fecker Big Grin
Phase 1 D-Turdo, K14@24 psi, De-cat, meaty backbox, Bosch pump, grinded LDA pin, duel air fed K&N =133.7bhp & 188ft/lbs
Reply
Thanks given by:
#16
Definitely need different wheels, speedline 2118' Smile
[Image: Cn91r40h.jpg] 
Astor 6 Fast road/track project
Reply
Thanks given by:
#17
Haha it will be washed Friday lol 

And thanks guys Big Grin I guess I'm a little bored of it as I see it all the time. In all honesty I desperately want a set of TD 1.2s they are my favourite wheels 

(25-03-2015, 01:53 PM)7057sam Wrote: Definitely need different wheels, speedline 2118' Smile

Just had a search of those wheels and they look awesome!

(25-03-2015, 12:27 PM)adam b Wrote: Remove your illegal tints on the front windows? Sorry its a pet hate of mine Wink

Otherwise I quite like the white 'clones. Everyone tries to go banded steels but few actually pull it off well...
I'd make it lighter and put on significantly lighter wheels/tyres etc. If you are going to the cost anyway you might as well make it quicker Smile

Bosch pump is going on Friday and intercooler too follow. I'll be after a uprated turbo soon. Want to go for a GT2052
Reply
Thanks given by:
#18
[attachment=22390]
I need these! 
Reply
Thanks given by:
#19
^ Someone's happy to be in a 306!!
Reply
Thanks given by:
#20
(25-03-2015, 08:34 PM)Iceman299 Wrote: ^ Someone's happy to be in a 306!!

Haha who isn't happy to be in a 306?
Reply
Thanks given by:
#21
(25-03-2015, 12:27 PM)adam b Wrote: Remove your illegal tints on the front windows? Sorry its a pet hate of mine Wink

This tbh. Visibilty out of those windows at night is going to be like wearing sunglasses, which is stupid, hence having your front windows tinted is stupid. Sorry if that's a bit blunt, but that's just my opinion. 

Otherwise, I also think this looks pretty sorted other than wheel choice, and forget what JJ said, I had the same (if not very similar) spoiler on my DT, and I loved it. Big Grin

Could do with a good wash and detail though to really show it off. Wink
[Image: P1060836_zpsz3xgxt7q.jpg]
Reply
Thanks given by:
#22
(25-03-2015, 09:09 PM)WiNgNuTz Wrote:
(25-03-2015, 12:27 PM)adam b Wrote: Remove your illegal tints on the front windows? Sorry its a pet hate of mine Wink

This tbh. Visibilty out of those windows at night is going to be like wearing sunglasses, which is stupid, hence having your front windows tinted is stupid. Sorry if that's a bit blunt, but that's just my opinion. 

Otherwise, I also think this looks pretty sorted other than wheel choice, and forget what JJ said, I had the same (if not very similar) spoiler on my DT, and I loved it. Big Grin


Could do with a good wash and detail though to really show it off. Wink

Visibility isn't that bad for me to be honest and yeah the spoiler is staying Smile what do you think about putting those pro race 3 wheels on? Also thinking morretts 
Reply
Thanks given by:
#23
I had 2% limo front and rears years ago. Visibility was fine at night unless you were in an unlit carpark! 
Reply
Thanks given by:
#24
They're still illegal whether you think your visibilty "isn't that bad" or not, and for good reason. But that's the last I'll say on it...if you leave them on, that's your call. Tongue

I'm not a fan of Morettes tbh, would rather have black masks if I didn't have my ABM's. Wink
[Image: P1060836_zpsz3xgxt7q.jpg]
Reply
Thanks given by:
#25
(25-03-2015, 09:16 PM)WiNgNuTz Wrote: They're still illegal whether you think your visibilty "isn't that bad" or not, and for good reason. But that's the last I'll say on it...if you leave them on, that's your call. Tongue

I'm not a fan of Morettes tbh, would rather have black masks if I didn't have my ABM's. Wink

Oh yeah, deffo illegal. Just saying visibility isn't as bad as people think. 
Reply
Thanks given by:
#26
(25-03-2015, 09:16 PM)WiNgNuTz Wrote: They're still illegal whether you think your visibilty "isn't that bad" or not, and for good reason. But that's the last I'll say on it...if you leave them on, that's your call. Tongue

I'm not a fan of Morettes tbh, would rather have black masks if I didn't have my ABM's. Wink

Fair enough Smile and yeah I'm undecided on morretts. Need to find another set of wheels first as the clones need a refurb
Reply
Thanks given by:
#27
Ive just got pro race 3s on my estate Wink
[Image: av5ym8.jpg]
Reply
Thanks given by:
#28
If you go for banded steelies, I think a cream colour would look good.
Reply
Thanks given by:
#29
(25-03-2015, 09:32 PM)Jimbo Wrote: Ive just got pro race 3s on my estate Wink

Just had a look at your project thread, holy shit it looks awesome on those wheels 
Reply
Thanks given by:
#30
I'll soon be fitting white TD pro race 3s to my gti6. Big Grin
This post is an artistic work of fiction and falsehood. Only a fool would take anything posted above as fact.

62k Diablo Phase 1 Gti-6:
Project Thread
Reply
Thanks given by:


Possibly Related Threads…
Thread Author Replies Views Last Post
  Lost the love and need some help/inspiration :( londondan86 25 3,987 18-09-2014, 11:39 PM
Last Post: procta

Forum Jump:


Users browsing this thread: 5 Guest(s)