Posts: 1,058
Threads: 18
Joined: Jan 2014
Reputation:
10
Location: Wiltshire
Car Model/Spec: 3 x 205 GTi & 306 HDi
Thanks: 3
Given 17 thank(s) in 17 post(s)
26-08-2014, 03:27 PM
(This post was last modified: 05-09-2014, 11:53 AM by powerandtorque.)
Going to be breaking and scrapping my 1999/V Ph3 306 HDi this weekend if there's anyone after anything?
It's a 5dr hatch Meridian in Diablo red.
Mechanically and electrically everything works that I'm aware of other than the usual dead aircon. Engine runs well, averaging 50+mpg and doesn't use any oil/coolant, but the injectors are getting tired and would benefit from replacement (I have a set from a 307 I can include). Bodywork is reasonable but has a few marks in places along with a few patches of the usual Diablo lacquer peel. Interior is pretty tidy, just some slight wear/discolouration to the drivers outer bolster as usual - no rips/tears though.
Let me know what parts you need, but a quick list of some of the bigger bits:
- Engine complete with turbo, HP pump etc (can be heard running) - £60
- Stage 1+ mapped "162" (single plug) ECU, BSI and keyfob - £100
- In tank LP fuel pump (new ~3 years back) - £30
- Fuel pump relay (new ~3 years back) - £10
- Half leather front and rear seats - £50/set
- Front 18m hubs complete inc ABS sensors - £40/pair
- Driveshafts - £20/pair
- Ph3 "crystal" headlights - £20/pair
The following parts are either not available or sold / provisionally sold:
- Rear beam
- Front struts/dampers
- Wishbones
- Wheels
- Front GTi-6 brakes
- Steering wheel
- Bonnet and drivers side wing (provisionally sold to Alan_M)
- Gearbox (provisionally sold to Paul_13)
- Rear bumper (provisionally sold to SRowell)
- Starter motor (provisionally sold to Niall)
- Side repeaters and interior light (provisionally sold to Nathan1305)
Can post/courier the smaller items but big/heavy items (e.g. engine and interior) are collection only or I can possibly meet you part way for the cost of fuel.
Located in Swindon, Wiltshire (10 minutes from M4 J15/16)
1990 Peugeot 205 GTi 1.9 // 1991 Peugeot 205 GTi 1.9 16v // 1992 Peugeot 205 GTi 1.9 // 1999 Peugeot 306 HDi Estate
Posts: 13,881
Threads: 476
Joined: Dec 2011
Reputation:
81
Location: Ipswich
Car Model/Spec: 306 Rallye
Thanks: 4
Given 104 thank(s) in 102 post(s)
Pics of the front and rear bumper please. looking for as mint as possible as mine are cracked and have lacquer peel! Can collect at forge action day on the 12th/13th.
Posts: 1,058
Threads: 18
Joined: Jan 2014
Reputation:
10
Location: Wiltshire
Car Model/Spec: 3 x 205 GTi & 306 HDi
Thanks: 3
Given 17 thank(s) in 17 post(s)
I'll get you some pictures when it stops raining Sam, but from memory the rear one is pretty good and certainly more than presentable, the front probably not much better than yours as it too is suffering lacquer peel and has the usual plastic tabs on the underside snapped.
1990 Peugeot 205 GTi 1.9 // 1991 Peugeot 205 GTi 1.9 16v // 1992 Peugeot 205 GTi 1.9 // 1999 Peugeot 306 HDi Estate
Posts: 13,881
Threads: 476
Joined: Dec 2011
Reputation:
81
Location: Ipswich
Car Model/Spec: 306 Rallye
Thanks: 4
Given 104 thank(s) in 102 post(s)
Not too bothered about the plastic tabs on the underside.
Definitely after the rear but can live without the front if it isnt great but itd still be good to see pics of everything etc. Any idea on prices?
Posts: 2,086
Threads: 93
Joined: Dec 2011
Reputation:
8
Location: On a soap box
Car Model/Spec: Stock HDi Meridian & Mk2 MX-5
Thanks: 0
Given 1 thank(s) in 1 post(s)
Pictures pleeeze.
Interested in bodywork bits dependant on condition, and maybe some interior bits too.
Diablo Meridian HDi - 125bhp - 73.0MPG - Halfords Wheels
Posts: 1,058
Threads: 18
Joined: Jan 2014
Reputation:
10
Location: Wiltshire
Car Model/Spec: 3 x 205 GTi & 306 HDi
Thanks: 3
Given 17 thank(s) in 17 post(s)
1990 Peugeot 205 GTi 1.9 // 1991 Peugeot 205 GTi 1.9 16v // 1992 Peugeot 205 GTi 1.9 // 1999 Peugeot 306 HDi Estate
Posts: 13,881
Threads: 476
Joined: Dec 2011
Reputation:
81
Location: Ipswich
Car Model/Spec: 306 Rallye
Thanks: 4
Given 104 thank(s) in 102 post(s)
Okay buddy. Obviously that front bumper isnt great but I'll take the rear one! How much are you looking for it? The fog light protectors are interesting too! How much do you want for those?
Posts: 13,881
Threads: 476
Joined: Dec 2011
Reputation:
81
Location: Ipswich
Car Model/Spec: 306 Rallye
Thanks: 4
Given 104 thank(s) in 102 post(s)
Oh and can you do the driver side wing fairly cheap?
Posts: 1,058
Threads: 18
Joined: Jan 2014
Reputation:
10
Location: Wiltshire
Car Model/Spec: 3 x 205 GTi & 306 HDi
Thanks: 3
Given 17 thank(s) in 17 post(s)
26-08-2014, 08:03 PM
(This post was last modified: 26-08-2014, 08:07 PM by powerandtorque.)
£30 sound reasonable for the rear bumper?
It's got a complete set of headlight and foglight protectors on it that I'm umm'ing and ahh'ing about fitting to the estate - I'll have a think and make a decision
(26-08-2014, 08:01 PM)SRowell Wrote: Oh and can you do the driver side wing fairly cheap?
You've been beaten to it unfortunately. It's pretty much mint too, just to annoy you!
The passenger side is available still.
1990 Peugeot 205 GTi 1.9 // 1991 Peugeot 205 GTi 1.9 16v // 1992 Peugeot 205 GTi 1.9 // 1999 Peugeot 306 HDi Estate
Posts: 13,881
Threads: 476
Joined: Dec 2011
Reputation:
81
Location: Ipswich
Car Model/Spec: 306 Rallye
Thanks: 4
Given 104 thank(s) in 102 post(s)
Nooooooo. okay let me know about the wing if the sale falls through. Yeh if £30 is your best then I guess that will have to do!
Posts: 398
Threads: 83
Joined: Jan 2012
Reputation:
0
Thanks: 0
Given 2 thank(s) in 2 post(s)
what about the rub strips? im wanting a mint set with no laquer peel...
Also, if alternators going cheap ill take that too
Posts: 1,058
Threads: 18
Joined: Jan 2014
Reputation:
10
Location: Wiltshire
Car Model/Spec: 3 x 205 GTi & 306 HDi
Thanks: 3
Given 17 thank(s) in 17 post(s)
I'll double check them in the morning, but I replaced some earlier this year so at least some are good with no lacquer peel or broken clips.
Alternator is fine, charging at 14.4v last time I checked it - again, I'll double check it tomorrow and get back to you
1990 Peugeot 205 GTi 1.9 // 1991 Peugeot 205 GTi 1.9 16v // 1992 Peugeot 205 GTi 1.9 // 1999 Peugeot 306 HDi Estate
Posts: 398
Threads: 83
Joined: Jan 2012
Reputation:
0
Thanks: 0
Given 2 thank(s) in 2 post(s)
ok mate pm me best price for the lot pal
Posts: 1,058
Threads: 18
Joined: Jan 2014
Reputation:
10
Location: Wiltshire
Car Model/Spec: 3 x 205 GTi & 306 HDi
Thanks: 3
Given 17 thank(s) in 17 post(s)
Just to confirm that all the strips are free of lacquer peel and the alternator is good (~14.9v with no electrical load, ~14.2v with full load of lights, blowers, heated screen etc). I'll PM you now
1990 Peugeot 205 GTi 1.9 // 1991 Peugeot 205 GTi 1.9 16v // 1992 Peugeot 205 GTi 1.9 // 1999 Peugeot 306 HDi Estate
Posts: 10,864
Threads: 117
Joined: Dec 2011
Reputation:
119
Location: Southampton
Car Model/Spec: 306 HDi and friends
Thanks: 13
Given 106 thank(s) in 106 post(s)
Posts: 2,125
Threads: 210
Joined: Feb 2014
Reputation:
1
Location: Bristol
Car Model/Spec: Ph1 White Gti6/306 DTurbo
Thanks: 19
Given 7 thank(s) in 7 post(s)
How much for the side repeaters?
Posts: 1,058
Threads: 18
Joined: Jan 2014
Reputation:
10
Location: Wiltshire
Car Model/Spec: 3 x 205 GTi & 306 HDi
Thanks: 3
Given 17 thank(s) in 17 post(s)
(27-08-2014, 05:43 PM)Poodle Wrote: What's the mileage? The shell and some of the running gear has done a cool quarter million, other parts less.
Isn't it somewhat academic though, when surely you buy parts on condition rather than mileage?
(27-08-2014, 07:13 PM)Nathan1305 Wrote: How much for the side repeaters? Call it a couple of quid a side?
1990 Peugeot 205 GTi 1.9 // 1991 Peugeot 205 GTi 1.9 16v // 1992 Peugeot 205 GTi 1.9 // 1999 Peugeot 306 HDi Estate
Posts: 18,242
Threads: 386
Joined: Dec 2011
Reputation:
87
Location: Suffolk
Car Model/Spec: Focus Titanium
Thanks: 1
Given 118 thank(s) in 117 post(s)
28-08-2014, 08:29 AM
(This post was last modified: 28-08-2014, 08:30 AM by Toms306.)
250k on a diablo!? How is there any lacquer left!?
Also, that leather 4 spoke wheel still looks mint!? If so, let C2K know, I know he was after one.
Posts: 1,058
Threads: 18
Joined: Jan 2014
Reputation:
10
Location: Wiltshire
Car Model/Spec: 3 x 205 GTi & 306 HDi
Thanks: 3
Given 17 thank(s) in 17 post(s)
(28-08-2014, 08:29 AM)Toms306 Wrote: 250k on a diablo!? How is there any lacquer left!? Because, despite the unwashed appearance in the pictures, it's been well cared for throughout its life to the point that nobody who's seen or driven it can believe the mileage.
Other than a few spots on the roof, the worst of the lacquer peel is on the bumper and grill thanks to stone chips from all the motorway miles. Bonnet had suffered on the leading edge for the same reason, but I replaced that last year.
(28-08-2014, 08:29 AM)Toms306 Wrote: Also, that leather 4 spoke wheel still looks mint!? If so, let C2K know, I know he was after one. Is it mint, that's why unfortunately for C2K I'm keeping it and fitting it to the estate (which has pitted as usual)
1990 Peugeot 205 GTi 1.9 // 1991 Peugeot 205 GTi 1.9 16v // 1992 Peugeot 205 GTi 1.9 // 1999 Peugeot 306 HDi Estate
Posts: 18,242
Threads: 386
Joined: Dec 2011
Reputation:
87
Location: Suffolk
Car Model/Spec: Focus Titanium
Thanks: 1
Given 118 thank(s) in 117 post(s)
28-08-2014, 08:59 AM
(This post was last modified: 28-08-2014, 09:00 AM by Toms306.)
I had a diablo covered in lacquer peel at just 9 years old/65k miles lol, I don't see how that could be avoided even with a regular wash but you are right, I'd never have guessed the mileage either!
The front bonnet edges on these do seem to attract chips, and once that happens the water gets in and lifts the rest of the lacquer!
Posts: 2,086
Threads: 93
Joined: Dec 2011
Reputation:
8
Location: On a soap box
Car Model/Spec: Stock HDi Meridian & Mk2 MX-5
Thanks: 0
Given 1 thank(s) in 1 post(s)
How tidy is the bonnet, and what do you want for it?
Diablo Meridian HDi - 125bhp - 73.0MPG - Halfords Wheels
Posts: 1,058
Threads: 18
Joined: Jan 2014
Reputation:
10
Location: Wiltshire
Car Model/Spec: 3 x 205 GTi & 306 HDi
Thanks: 3
Given 17 thank(s) in 17 post(s)
Bonnet is very good... but it's provisionally sold already I'm afraid.
1990 Peugeot 205 GTi 1.9 // 1991 Peugeot 205 GTi 1.9 16v // 1992 Peugeot 205 GTi 1.9 // 1999 Peugeot 306 HDi Estate
Posts: 2,086
Threads: 93
Joined: Dec 2011
Reputation:
8
Location: On a soap box
Car Model/Spec: Stock HDi Meridian & Mk2 MX-5
Thanks: 0
Given 1 thank(s) in 1 post(s)
Darn. And those seats don't have side airbags, do they?
Diablo Meridian HDi - 125bhp - 73.0MPG - Halfords Wheels
Posts: 667
Threads: 68
Joined: Dec 2013
Reputation:
4
Location: Holbeach, Lincolnshire
Car Model/Spec: 306 HDI
Thanks: 0
Given 1 thank(s) in 1 post(s)
fuel pressure regulator available and price posted?
thanks
Posts: 1,058
Threads: 18
Joined: Jan 2014
Reputation:
10
Location: Wiltshire
Car Model/Spec: 3 x 205 GTi & 306 HDi
Thanks: 3
Given 17 thank(s) in 17 post(s)
28-08-2014, 05:10 PM
(This post was last modified: 28-08-2014, 05:11 PM by powerandtorque.)
(28-08-2014, 10:18 AM)Kezzieboy Wrote: Darn. And those seats don't have side airbags, do they? It's an early Ph3 Meridian so it only has seat belt pre-tensioners and not the side airbags I'm afraid.
That said, if you want them and are collecting, you're welcome to remove the airbag ECU and loom for free to be able to run them.
(28-08-2014, 04:13 PM)mspdan Wrote: fuel pressure regulator available and price posted? Yeah I can remove the fuel pressure regulator for you and post it - not sure of the going rate for them, so does £20 including postage sound about right?
Works fine as far as I'm aware - certainly engine runs well and copes just fine with the Stage 1+ remap, has never cut out under load etc.
1990 Peugeot 205 GTi 1.9 // 1991 Peugeot 205 GTi 1.9 16v // 1992 Peugeot 205 GTi 1.9 // 1999 Peugeot 306 HDi Estate
Posts: 667
Threads: 68
Joined: Dec 2013
Reputation:
4
Location: Holbeach, Lincolnshire
Car Model/Spec: 306 HDI
Thanks: 0
Given 1 thank(s) in 1 post(s)
Hi buddy,
£20 posted sounds fine any chance I could pay extra for prompt delivery as car off the road until I get a new one?
Long as it comes out without snapping mate with filter on end.
Thanks
Posts: 1,213
Threads: 92
Joined: Dec 2011
Reputation:
5
Location: Birmingham
Car Model/Spec: Subaru 20.d, GTi 6, 205 xs
Thanks: 0
Given 3 thank(s) in 3 post(s)
What exhaust system does it have?
Vehicle repair and servicing in the midlands pm for details
Current cars
Subaru Impreza 2.0d - Daily
306 1.8 - track whore soon to be GTI6
Posts: 1,058
Threads: 18
Joined: Jan 2014
Reputation:
10
Location: Wiltshire
Car Model/Spec: 3 x 205 GTi & 306 HDi
Thanks: 3
Given 17 thank(s) in 17 post(s)
29-08-2014, 08:45 AM
(This post was last modified: 29-08-2014, 08:46 AM by powerandtorque.)
(28-08-2014, 07:52 PM)mspdan Wrote: £20 posted sounds fine any chance I could pay extra for prompt delivery as car off the road until I get a new one?
Long as it comes out without snapping mate with filter on end.
That fine - I'll remove it for you when I get back from work today. Unlikely to get it off and boxed in time for today's post, but I can post it tomorrow for you if that's OK?
(29-08-2014, 07:29 AM)td_dan Wrote: What exhaust system does it have?
Standard system - OE CAT, standard centre section, and a non-sport spec (ie no chrome trim) backbox. The later obviously isn't original as Meridian's should have the sport spec backbox with the chrome trim, but it would be easy enough to swap the tip over if you've access to a welder.
Probably not of much interest, but the centre section might be useful for someone to chop up to make a straight-through backbox as per the guide on here.
1990 Peugeot 205 GTi 1.9 // 1991 Peugeot 205 GTi 1.9 16v // 1992 Peugeot 205 GTi 1.9 // 1999 Peugeot 306 HDi Estate
Posts: 667
Threads: 68
Joined: Dec 2013
Reputation:
4
Location: Holbeach, Lincolnshire
Car Model/Spec: 306 HDI
Thanks: 0
Given 1 thank(s) in 1 post(s)
That fine - I'll remove it for you when I get back from work today. Unlikely to get it off and boxed in time for today's post, but I can post it tomorrow for you if that's OK?
no worries buddy drop us a message with your paypal details etc and ill send contact details mate.
any chance you can post it tomorrow if it comes out okay on delivery for monday?
thanks
Posts: 588
Threads: 91
Joined: Oct 2013
Reputation:
2
Location: Reading
Car Model/Spec: BMW 330Ci/VW Up/205GTi/205Mi16
Thanks: 0
Given 5 thank(s) in 5 post(s)
Can I also have the gearknob and steering wheel?
If you ever take the doorcards off, I could also do with the membrane for the just the front speakers too. Might have the bump strips too if they don't go with the other chap^.
|