Posts: 285
Threads: 31
Joined: Oct 2013
Reputation:
1
Location: Dorset, Poole
Car Model/Spec: 306 1.8
Thanks: 0
Given 2 thank(s) in 2 post(s)
Done some reading about tuning the Lucas... And it seems there's mixed results..Is there much point in playing with the Lucas pump... Or just waiting until I can get a bosh pump injectors and lines. Also, what is the top speed of a d turbo with the standard gearbox on it?
What sort of results can you expect? Bhp/torque etc
Cheers, laurence
Posts: 5,902
Threads: 142
Joined: Dec 2011
Reputation:
58
Location: Hastings, East Sussex
Car Model/Spec: E46 BMW 320d
Thanks: 17
Given 28 thank(s) in 28 post(s)
I've tuned my Lucas pump, making ~20psi on the boost gauge, and a marked improvement in performance over standard...no idea what sort of figures its making as yet though, gonna be budgetting for a go on the dyno at FCS, so should have a ballpark figure then.
As for top speed, i've had mine topped out at about 118mph on my private runway.
Posts: 1,924
Threads: 86
Joined: Dec 2011
Reputation:
2
Thanks: 0
Given 1 thank(s) in 1 post(s)
FCS dynos are useless mate.
Posts: 5,902
Threads: 142
Joined: Dec 2011
Reputation:
58
Location: Hastings, East Sussex
Car Model/Spec: E46 BMW 320d
Thanks: 17
Given 28 thank(s) in 28 post(s)
I know they're not renowned for their accuracy, but im only after a rough figure...may end up getting a second opinion at some point, but im not too sure where the local dyno would be for me.
Posts: 1,924
Threads: 86
Joined: Dec 2011
Reputation:
2
Thanks: 0
Given 1 thank(s) in 1 post(s)
id take it to a proper set of rollers, my mates old vts made 169.9bhp 3 days before FCS on some proper rollers after a 12 hour live mapping session, it made 128bhp on FCS rollers..
Posts: 285
Threads: 31
Joined: Oct 2013
Reputation:
1
Location: Dorset, Poole
Car Model/Spec: 306 1.8
Thanks: 0
Given 2 thank(s) in 2 post(s)
(11-03-2014, 09:02 PM)WiNgNuTz Wrote: I've tuned my Lucas pump, making ~20psi on the boost gauge, and a marked improvement in performance over standard...no idea what sort of figures its making as yet though, gonna be budgetting for a go on the dyno at FCS, so should have a ballpark figure then.
As for top speed, i've had mine topped out at about 118mph on my private runway.
Ahh nice one, mine tops out at about 108 at the moment on the private runway... And doesn't really get there that well...No where near the redline just runs out of fuelling I think, Is the pump tuning the only thing you've done? Have a feeling I've got the kkk turbo, haven't looked yet... Haha
Posts: 20,092
Threads: 591
Joined: Nov 2012
Reputation:
54
Location: Cotswolds
Car Model/Spec: Stage 13 16v HDi
Thanks: 22
Given 68 thank(s) in 68 post(s)
(11-03-2014, 09:05 PM)WiNgNuTz Wrote: I know they're not renowned for their accuracy, but im only after a rough figure...may end up getting a second opinion at some point, but im not too sure where the local dyno would be for me.
Then guess.
Coz that would be more accurate.
Posts: 5,902
Threads: 142
Joined: Dec 2011
Reputation:
58
Location: Hastings, East Sussex
Car Model/Spec: E46 BMW 320d
Thanks: 17
Given 28 thank(s) in 28 post(s)
I've tuned the pump, got a cone filter, and straight through exhaust. Did the Lucas equivalent of a GOV mod too, but i can't remember how i did it, or what bit needed tweaking, will see if i can find the guide for you, gave me a few more revs at the top end. Lose fuel about 4.5-4.7k rpm now...
Posts: 285
Threads: 31
Joined: Oct 2013
Reputation:
1
Location: Dorset, Poole
Car Model/Spec: 306 1.8
Thanks: 0
Given 2 thank(s) in 2 post(s)
(11-03-2014, 09:15 PM)WiNgNuTz Wrote: I've tuned the pump, got a cone filter, and straight through exhaust. Did the Lucas equivalent of a GOV mod too, but i can't remember how i did it, or what bit needed tweaking, will see if i can find the guide for you, gave me a few more revs at the top end. Lose fuel about 4.5-4.7k rpm now...
Nice one, that'd be good if you could! Any idea If it's worth putting bigger fuel lines on etc or is it not worth it/no possible
Posts: 6,258
Threads: 371
Joined: Feb 2014
Reputation:
29
Location: suffolk
Car Model/Spec: ford fiesta
Thanks: 4
Given 82 thank(s) in 82 post(s)
This would be great info to have to hand as I'm running Lucas ATM then will be switching at a later date.
Subscribed . also what size cone filter u guys buy?
On a break from 306oc for personal reasons. If anyone needs or wants me most of you have my number and or facebook messenger
Thanks for the good times guys n gals. I might be back. Who knows.
Posts: 2,103
Threads: 122
Joined: Jan 2013
Reputation:
9
Location: south west, devon
Car Model/Spec: Kingfisher Ph1 Dturbo S
Thanks: 1
Given 7 thank(s) in 7 post(s)
The.biggest.cone you can fit the better
Posts: 6,258
Threads: 371
Joined: Feb 2014
Reputation:
29
Location: suffolk
Car Model/Spec: ford fiesta
Thanks: 4
Given 82 thank(s) in 82 post(s)
(11-03-2014, 09:25 PM)Jimbo Wrote: The.biggest.cone you can fit the better
Meant inner diameter last one I tuned ages ago I cut the standard intake pipe next to battery plate and plonked filter there. Any location ideas too?
On a break from 306oc for personal reasons. If anyone needs or wants me most of you have my number and or facebook messenger
Thanks for the good times guys n gals. I might be back. Who knows.
Posts: 86
Threads: 10
Joined: Jan 2014
Thanks: 0
Given 0 thank(s) in 0 post(s)
Standard my boost gauge was reading 14 psi. After some playing it went up and held at 15. Then I adjusted the waste gate on the turbo and she holds 16 psi mostly but will boost to 17 in fifth. Still needs more max fuel I think though. Not a single bit of smoke yet on or off boost :z I can only see a haze in the dark when I'm on boost in other people's headlights but nothing in the day at all
Posts: 285
Threads: 31
Joined: Oct 2013
Reputation:
1
Location: Dorset, Poole
Car Model/Spec: 306 1.8
Thanks: 0
Given 2 thank(s) in 2 post(s)
11-03-2014, 09:55 PM
(This post was last modified: 11-03-2014, 09:56 PM by laurence_13.)
(11-03-2014, 09:21 PM)tombarnard1989 Wrote: This would be great info to have to hand as I'm running Lucas ATM then will be switching at a later date.
Subscribed . also what size cone filter u guys buy?
That's my plans... Might both learn something lol
(11-03-2014, 09:33 PM)randomcaller Wrote: Standard my boost gauge was reading 14 psi. After some playing it went up and held at 15. Then I adjusted the waste gate on the turbo and she holds 16 psi mostly but will boost to 17 in fifth. Still needs more max fuel I think though. Not a single bit of smoke yet on or off boost :z I can only see a haze in the dark when I'm on boost in other people's headlights but nothing in the day at all
I get haze on boost in the dark with no mods anyway...
Posts: 397
Threads: 77
Joined: Aug 2013
Reputation:
2
Location: Derby
Car Model/Spec: 306 phase 1 bianca dturbo
Thanks: 0
Given 0 thank(s) in 0 post(s)
Open wastegate fully, close boost compensator fully and give max fuel a turn until you get a whiff of smoke on boost. I did this before I swapped to a Bosch and it was a big improvement on standard. There is a great guide on tdoc.co.uk by jammapic with more technical information. Well worth a look.
93 106 xsi
98 306 1.9d
98 306 1.9td lx
01 306 2.0hdi
97 306 1.9td estate
96 306 dturbo
96 306 dturbo
Posts: 170
Threads: 19
Joined: Jul 2013
Reputation:
1
Location: Scotland, Strathaven/ East Kilbride
Car Model/Spec: phase 1 sedan SLDT
Thanks: 0
Given 0 thank(s) in 0 post(s)
Definitely well worth playing with the Lucas. Makes a massive difference. Just need to learn to control the black smoke with your right foot but you soon get used to that. Takes longer to read about how to do it than it does to actually do it. It's also free power! Darren Lobb has a great video that shows the basics. I'm sure the link is on here somewhere.
Posts: 6,482
Threads: 226
Joined: Dec 2011
Reputation:
24
Location: Cornwall
Car Model/Spec: A3 TDi
Thanks: 0
Given 0 thank(s) in 0 post(s)
f*ck air filters for a laugh lol!
Doesnt even own a 306.
Posts: 285
Threads: 31
Joined: Oct 2013
Reputation:
1
Location: Dorset, Poole
Car Model/Spec: 306 1.8
Thanks: 0
Given 2 thank(s) in 2 post(s)
Nice one, yeah found the video... might have a play around with it this weekend
Posts: 3,377
Threads: 96
Joined: Dec 2011
Reputation:
7
Location: Brizzel
Car Model/Spec: 306 tractor
Thanks: 0
Given 0 thank(s) in 0 post(s)
Any results?
the smokey old bus that sounds like a tractor...
Posts: 285
Threads: 31
Joined: Oct 2013
Reputation:
1
Location: Dorset, Poole
Car Model/Spec: 306 1.8
Thanks: 0
Given 2 thank(s) in 2 post(s)
Sorry... Nothing yet, can't decide wether to do it or not... Don't want to compromise realiability. I can't really afford it at the moment. Might try and get the boost gauge fitted this weekend and go from there
Posts: 6,367
Threads: 87
Joined: Dec 2011
Reputation:
48
Location: South Yorks.
Car Model/Spec: Rouge vallelunga 5 door Dturbo
Thanks: 2
Given 74 thank(s) in 70 post(s)
(12-03-2014, 07:13 AM)306pc Wrote: Open wastegate fully, close boost compensator fully and give max fuel a turn until you get a whiff of smoke on boost. I did this before I swapped to a Bosch and it was a big improvement on standard. There is a great guide on tdoc.co.uk by jammapic with more technical information. Well worth a look.
I think you mean CLOSE wastegate lol.....
Phase 1 D-Turdo, K14@24 psi, De-cat, meaty backbox, Bosch pump, grinded LDA pin, duel air fed K&N =133.7bhp & 188ft/lbs
Posts: 6,258
Threads: 371
Joined: Feb 2014
Reputation:
29
Location: suffolk
Car Model/Spec: ford fiesta
Thanks: 4
Given 82 thank(s) in 82 post(s)
Ill be doing mine today or tomorrow will take pictures and write some guide stuff
On a break from 306oc for personal reasons. If anyone needs or wants me most of you have my number and or facebook messenger
Thanks for the good times guys n gals. I might be back. Who knows.
Posts: 418
Threads: 17
Joined: Nov 2013
Reputation:
4
Location: Dover, Kent
Car Model/Spec: 2000 HDi Wagon
Thanks: 0
Given 0 thank(s) in 0 post(s)
Posts: 397
Threads: 77
Joined: Aug 2013
Reputation:
2
Location: Derby
Car Model/Spec: 306 phase 1 bianca dturbo
Thanks: 0
Given 0 thank(s) in 0 post(s)
(21-03-2014, 08:00 AM)Mattcheese31 Wrote: (12-03-2014, 07:13 AM)306pc Wrote: Open wastegate fully, close boost compensator fully and give max fuel a turn until you get a whiff of smoke on boost. I did this before I swapped to a Bosch and it was a big improvement on standard. There is a great guide on tdoc.co.uk by jammapic with more technical information. Well worth a look.
I think you mean CLOSE wastegate lol.....
Damn auto correct?!?
93 106 xsi
98 306 1.9d
98 306 1.9td lx
01 306 2.0hdi
97 306 1.9td estate
96 306 dturbo
96 306 dturbo
Posts: 3,377
Threads: 96
Joined: Dec 2011
Reputation:
7
Location: Brizzel
Car Model/Spec: 306 tractor
Thanks: 0
Given 0 thank(s) in 0 post(s)
(22-03-2014, 05:49 PM)Lego Jon Wrote: http://www.nosmokenopoke.com/forum/showt...ning-Guide
Just use this.
Wish I'd found this before... oh well Bosch here I come
the smokey old bus that sounds like a tractor...
Posts: 6,258
Threads: 371
Joined: Feb 2014
Reputation:
29
Location: suffolk
Car Model/Spec: ford fiesta
Thanks: 4
Given 82 thank(s) in 82 post(s)
Bosch is better, but this is until i get one
On a break from 306oc for personal reasons. If anyone needs or wants me most of you have my number and or facebook messenger
Thanks for the good times guys n gals. I might be back. Who knows.
|