WIW/GI: 205 gld sleeper

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
WIW/GI: 205 gld sleeper
#1
So due to family commitments this could be for sale or braking soon. Nothing is set in stone as I change my mind daily lol

So specs are as follows

Garret gt20 turbo
Arp head studs
Skimmed head and pressure tested
New.Genuine Peugeot valve stem seals
Valves reground in.
Mls head gasket
HDI conrods
Cg paddle clutch
Egt gauge (not in car but comes with it) sensor on manifold ready
Oil cooler (not on car)
Manual boost controller
Big front mount intercooler (not on car)
2 inch universal intercooler pipe kit
2 slim line fans
Xantia manifold non egr
Gt2259s (not on car)
3inch mandrel elbow bend
3 inch 60 degree exhaust pipe
3 inch v band on gt20
Solid gear linkages
Gti front arb.
White painted steels with new'ish front tyres.
11mm Bosch (needs looking at)
Powerflex lower engine mount

Pretty much every thing I can think of at min will update if I think of anything else.

Shell is 205 gld few dints worst being drivers rear quarter had some rust welded above doors now filled awaiting sanding, front end came you pretty nice with a good polish and wax. The car has no tax or mot.

The car starts and runs but has pump issues no idea what but carnt be nothing major probably needs setting up right, needs vacuum pump sealing.

For it to be finished it needs exhaust making, intercooler fitting, oil cooler, few other odds and ends and it should be done.

The car moved under its own power for the first time yesterday I only moved it off the drive then back on need to get vacuum pump sealed as Oil is coming out quite bad.

The only pic I have of how it stands now

[Image: DSC_0487_zps52d35a90.jpg]


This is not for sale right now but could be soon depending on what I can get for it, this ows me over £1000! I don't expect to get that back....

Please don't fill this thread with crap about what I do with my cars, just looking for advice on price as a whole or better of braking??

Thanks in advance Smile



Thanks given by:
#2
break it. you'll never see the figure


ill give you £250
[Image: 20A1806D-891D-40FB-BD52-AD519177A607-734...391753.jpg]
TEAM CONROD SHITTING RALLYE!
Thanks given by:
#3
Yeah will get more from breaking for sure, plenty of goodies to sell
[Image: 20gh7o0.jpg]
Thanks given by:
#4
(09-03-2014, 05:32 PM)Matt Wrote: break it. you'll never see the figure


ill give you £250

£250 wow! More than I was expecting Wink

(09-03-2014, 05:37 PM)rd070707 Wrote: Yeah will get more from breaking for sure, plenty of goodies to sell

Yer I no I could more braking but be nice to see it go on



Thanks given by:
#5
Doubt you would get half that tbh mate :/ best off breaking it or finishing it and selling/keeping
[Image: image_zps45f2003b.jpg]

Team Doesn't own a 306
Thanks given by:
#6
Price on 2259s and egt gauge Smile
Vehicle repair and servicing in the midlands pm for details 

Current cars
Subaru Impreza 2.0d - Daily
306 1.8 - track whore soon to be GTI6
Thanks given by:
#7
Hmmmmmm....205xud....
Wishes for more power...
Thanks given by:
#8
(09-03-2014, 06:00 PM)Danny2009 Wrote: Doubt you would get half that tbh mate :/ best off breaking it or finishing it and selling/keeping

Yer don't expect to get much Tbh, but what's it gonna be worth with 12 month mot with same spec?

(09-03-2014, 06:09 PM)td_dan Wrote: Price on 2259s and egt gauge Smile

Not for sale just a gauging interest will keep it in mind tho that your interested Smile

(09-03-2014, 07:04 PM)Piggy Wrote: Hmmmmmm....205xud....

Swap for 2.1? Tongue



Thanks given by:
#9
Swap for a 1.5d nad 106? Wink
Wishes for more power...
Thanks given by:
#10
(09-03-2014, 07:09 PM)Piggy Wrote: Swap for a 1.5d nad 106? Wink


Ooooo also tempting Big Grin Wink



Thanks given by:
#11
This is being broken breaking thread is coming soon



Thanks given by:
#12
Breaking**
Doesnt even own a 306.
Thanks given by:
#13
That's what I put ninja



Thanks given by:
#14
I'd happily buy this albeit running and together; and what's up with the pump? ThumbsUp

PM me if you want it sold... possible collection over easter break (first two weeks in April)

T&T left on it?
Diablo Hdi Dturbo and 205 1.9 project - it lives!
Thanks given by:
#15
(10-03-2014, 05:49 PM)ginge191 Wrote: I'd happily buy this albeit running and together; and what's up with the pump? ThumbsUp

PM me if you want it sold... possible collection over easter break (first two weeks in April)

T&T left on it?

No tax or test pump needs looking at Jenks says it needs setting up its running but with max fuel screw all way in and idle on back of pump maxed out.

And want it gone asap if any one wants to make an offer on full car with every bit I have to do with 205 then feel free but be quick cos I'm planning on stripping it tomorrow



Thanks given by:
#16
Gutting.

Someone buy it...I would trade the 106 for it in a blink if you were closer
Wishes for more power...
Thanks given by:
#17
(10-03-2014, 06:21 PM)Chris_90 Wrote:
(10-03-2014, 05:49 PM)ginge191 Wrote: I'd happily buy this albeit running and together; and what's up with the pump? ThumbsUp

PM me if you want it sold... possible collection over easter break (first two weeks in April)

T&T left on it?

No tax or test pump needs looking at Jenks says it needs setting up its running but with max fuel screw all way in and idle on back of pump maxed out.

And want it gone asap if any one wants to make an offer on full car with every bit I have to do with 205 then feel free but be quick cos I'm planning on stripping it tomorrow

Damn... what a shame
Diablo Hdi Dturbo and 205 1.9 project - it lives!
Thanks given by:
#18
If anyone wants it while I can deliver at cost
[Image: image_zps45f2003b.jpg]

Team Doesn't own a 306
Thanks given by:
#19
(10-03-2014, 06:47 PM)Piggy Wrote: Gutting.

Someone buy it...I would trade the 106 for it in a blink if you were closer

Wouldn't want 106 cos I've already got one and it's better looking Wink



Thanks given by:
#20
if any one wants parts takeing to combe i dont mind picking parts up from chirs and bringing them with me when i come down.
may save a few quid on postage that way.

unless chris is already going to combe if so ignore my post Tongue haha
Thanks given by:
#21
I right want to buy the engine ... Mmmm
Thanks given by:
#22
(10-03-2014, 10:13 PM)ash23 Wrote: if any one wants parts takeing to combe i dont mind picking parts up from chirs and bringing them with me when i come down.
may save a few quid on postage that way.

unless chris is already going to combe if so ignore my post Tongue haha

Ha ha no plans on going to combe to far for me Wink but thanks for the offer if that will help any one out let either of us no Smile

(10-03-2014, 10:32 PM)Jamieh2013 Wrote: I right want to buy the engine ... Mmmm

Get your money out Tongue



Thanks given by:
#23
This Can be locked or removed if admin like Smile



Thanks given by:


Forum Jump:


Users browsing this thread: 2 Guest(s)