Inlet Adapters, plus possibly more.

[Jimbo]

Yeah eithet will do just something to make sure it doesnt slip off under high boost, a beaded end is ideal

[Dean]

Nice paint skills james.. But yeah the one on the right of the pipe would be best suited, as with silicone it'l clamp into all the lips. Giggity.

[Wor Jimmy]

Nice paint skills james.. But yeah the one on the right of the pipe would be best suited, as with silicone it'l clamp into all the lips. Giggity.

I also made a welding jig too at work. Pics inc on phone!
Also the gas bottle is getting picked up monday. Weldy Weldy...

[Dean]

Nice paint skills james.. But yeah the one on the right of the pipe would be best suited, as with silicone it'l clamp into all the lips. Giggity.

I also made a welding jig too at work. Pics inc on phone!
Also the gas bottle is getting picked up monday. Weldy Weldy...

Is it getting dropped off at work? if so it means i need to haul a big ass gas bottle to the garage Good job i've cleared the entire car out, including the boot..

[Wor Jimmy]

Nice paint skills james.. But yeah the one on the right of the pipe would be best suited, as with silicone it'l clamp into all the lips. Giggity.

I also made a welding jig too at work. Pics inc on phone!
Also the gas bottle is getting picked up monday. Weldy Weldy...

Is it getting dropped off at work? if so it means i need to haul a big ass gas bottle to the garage Good job i've cleared the entire car out, including the boot..

Wait... You have CLEANED your car?? F*ckin hell the worlds guna end.

Nah Davie is picking it up from gateshead when hes getting some stock bar and dropping it off at mine.. Cake.


Never mind that.. worlds guna end so who cares.

[Dean]

I also made a welding jig too at work. Pics inc on phone!
Also the gas bottle is getting picked up monday. Weldy Weldy...

Is it getting dropped off at work? if so it means i need to haul a big ass gas bottle to the garage Good job i've cleared the entire car out, including the boot..

Wait... You have CLEANED your car?? F*ckin hell the worlds guna end.

Nah Davie is picking it up from gateshead when hes getting some stock bar and dropping it off at mine.. Cake.


Never mind that.. worlds guna end so who cares.

And not just that... the interior light is actually in place now.. not just hanging, and the aerial isn't leaking anymore.

This is either a good sign, or a really f*cking bad one when i've got to do the following starting this Thursday.
Clutch Change
Heater Matrix
Ball joints.
Rear pads
all new engine mounts.
and a service.

[Wor Jimmy]

What we going to do about these Td04 plates? cant we just get a f*cked turbo/Ect?

[Dean]

If I've got time while doing clutch and engine mounts I'll whip the turbo off mine and come around.
Only got 4 days to get it all sorted

[Wor Jimmy]

If I've got time while doing clutch and engine mounts I'll whip the turbo off mine and come around.
Only got 4 days to get it all sorted

Best get cracking then!

[Wor Jimmy]

I need some sizes! Dean has drilled and tapped the part that this fits on to, so I would like a second set of sizes before i do the final machine work (yes that base plate looks sh*t, trust me.. it will not when its finished ) Also i have 10 sets of these... ready to be made.

Can any one pitch in the sizes? Cheers... i really need to buy a 306..
[attachment=12759]

[Wor Jimmy]

Sorted! Pics will be up soon.

[clarkey2010]

still doing Td04 exhaust adapter plates as well?

[Dean]

Will be when I get my turbo off to get the plates mocked up, possibly today... maybe tomorrow.

[td_dan]

Im definatly interested in the td04 plates as its all i need now to strap mine on and saves me ordering plate and it looking a mess lol

[Wor Jimmy]

Still waiting on dean for the sizes on plates. (hes busy doing his clutch atm)
Inlet adapters are coming on though

http://306oc.co.uk/forum/thread-20452-po...#pid378073

[Connor]

Id be interested in a pair of bolt on 15mm spacer/stud conversion, any idea how much?

[Wor Jimmy]

Id be interested in a pair of bolt on 15mm spacer/stud conversion, any idea how much?

Sorry I'm not sure I am going to be able to do them anymore, not untill I find a cost effective way. doing a few other things atm too so not much time to get it sorted

[Connor]

Ok no worries

[nick000]

Are inlet adaptors coming on ok? Cheers Nick

[Wor Jimmy]

Are inlet adaptors coming on ok? Cheers Nick

Indeed
[attachment=12829]

[Jimbo]

Very nice that, ill be interested in one of these

[Wor Jimmy]

Very nice that, ill be interested in one of these

I'll start up a new selling thread when they are done, they still need the small 8-10mm pipe, are these critical? or just an (Ish size) ?

[Jimbo]

For a boost pipe take off? 8mm be fine I think.
These stainless??

[Wor Jimmy]

For a boost pipe take off? 8mm be fine I think.
These stainless??

Mild to keep the cost down

[Jimbo]

Sure, looking good all the same mate

[Wor Jimmy]

One of these is now on Deans car getting tested/ make sure the welds hold on the boost (they should)

Going to do them for £30 posted.
please note these do NOT come with gaskets or bolts. and are a 2.25 outside dia on the pipe. (2 inch silicone pipes still fit)

Pm if you want one. First come first serve