Posts: 35
Threads: 7
Joined: Nov 2013
Location: Co. Antrim
Car Model/Spec: D-turbo HDI
Thanks: 0
Given 0 thank(s) in 0 post(s)
So my radio fell in behind my centre console today and has been an absolute nightmare to remove. I've tried removing the wires and pulling it out sideways, but I can't reach the wiring for the radio. It's pretty much left me with either removing the air vents in order to remove the wiring, or removing the fascia for the console to bring the radio out.
Anyone know which way would be best to approach this?
Posts: 2,963
Threads: 100
Joined: Dec 2011
Reputation:
12
Location: Portsmouth
Car Model/Spec: 306 dturbo Ultra Spec
Thanks: 0
Given 0 thank(s) in 0 post(s)
Bottom panel will lever off with screwdriver.
Unplug lower button, unscrew clock and other screws in this area.
Reach to where radio was either side a 10mm but. Undo then pull facia off.
I think that's it.
Posts: 1,204
Threads: 195
Joined: Jul 2013
Reputation:
6
Location: Wolverhampton
Car Model/Spec: 2000 Xs 1.8 16v
Thanks: 0
Given 0 thank(s) in 0 post(s)
11-11-2013, 04:14 PM
(This post was last modified: 11-11-2013, 04:14 PM by underground375.)
Take the fasia out, then you can undo the 4 screws holding the heater controls in, If you was to remove the air vents there is a chance of snapping the clips when you pull it out. So id move the controls and get from it from under it.
Posts: 35
Threads: 7
Joined: Nov 2013
Location: Co. Antrim
Car Model/Spec: D-turbo HDI
Thanks: 0
Given 0 thank(s) in 0 post(s)
Thanks guys. The bottom of the radio is probably around the heater controls if that makes any difference?
Posts: 35
Threads: 7
Joined: Nov 2013
Location: Co. Antrim
Car Model/Spec: D-turbo HDI
Thanks: 0
Given 0 thank(s) in 0 post(s)
Cheers mate, I'll let you know how I get on. Usually dreadful at this kind of stuff!
Posts: 13,881
Threads: 476
Joined: Dec 2011
Reputation:
81
Location: Ipswich
Car Model/Spec: 306 Rallye
Thanks: 4
Given 104 thank(s) in 102 post(s)
Its really easy. dont worry about it! Just dont force it and look for screws and nuts everywhere!
Posts: 35
Threads: 7
Joined: Nov 2013
Location: Co. Antrim
Car Model/Spec: D-turbo HDI
Thanks: 0
Given 0 thank(s) in 0 post(s)
Absolutely no luck, radio is jammed in now and I can't reach the 10mm socket. Nightmare
Posts: 1,897
Threads: 162
Joined: May 2012
Reputation:
21
Location: Dunstable
Car Model/Spec: 306 HDI Dturbo, Estate & GTI6
Thanks: 0
Given 23 thank(s) in 23 post(s)
Take the clocks out, you will be able to reach in from the side to lift it and push it back out.