Breaking euroish hdi

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Breaking euroish hdi
#1
Right, it's time to get rid. The big scrapyard in the sky is calling, so anyone who wants any bits off this let me know. Obvious one is the wheels, rears just legal and almost new rainsport 2s on fronts. Spec below, whole thing available for £470 (with 6 months tax) or £400 without.

Bad points:
Windscreen broken, still watertight but not driveable.
Gearbox is leaking oil, the clutch was done recently and I think it's possible due to this, could be a seal.
Exhaust is now hanging very low under the car as it has come loose.
Front bumper is bent out of shape as I drove it up a kerb (that I had parked behind but forgot was there) like an idiot! Not that noticeable but I know it's there.
Rear tyres are legal but not a huge amount of tread left.
I think there's slight camber on the rear beam.

Good points:
Stage 1 map from pro Steve
Berlingo clutch that's only done a few hundred miles and was fitted brand new
Banded steels with almost new rainsport 2s on the front.
Front mount
Half leather interior
Roof bars
Decent bodywork (apart from the front bumper), the odd car park ding.
Lowered, how much I'm not sure, but it's low!
Straight through exhaust
Dewipered
Rolled rear arches
Rallye blanks
Set of black masks that need sealing that are sat in the boot with a set of brand new plates


Photos (before I damaged front bumper):

[Image: D7FEEA12-21BB-4A51-839B-D39E3218F9A2-160...0d1a1a.jpg]

[Image: C0A11C67-3A90-422B-B344-18B9204C2816-160...aa056a.jpg]

[Image: E022B533-5676-4C56-B2D2-3CDAE25282CA-160...b6fb41.jpg]

[Image: 0E05776A-2219-4088-801D-E6B9E8CE2EF6-160...09c28c.jpg]

[Image: 4B8E95C9-17BF-4DC5-BEEA-7D44E69971E8-160...a9b46c.jpg]

[Image: C25BC382-1623-43C7-BC20-CB29CBFE49F0-160...ed6622.jpg]
[Image: sig-3.jpg]
Reply
Thanks given by:
#2
How much for wheels?
Dibs if right price!
Reply
Thanks given by:
#3
Such a cool car gutted about this.
| Dyno Power Runs & Steady State Facilities Available, Just Ask Anytime |
| #DervMafia |

[Image: sigi-2.png]
Reply
Thanks given by:
#4
so are you willing to post the wheels now? if so pm me

[Image: DSC_0190-Copy_zpsf093f84d.jpg]
Member of 99% warning or your nothing club!

Reply
Thanks given by:
#5
Should have made it clear, wheels need to be collected and I need replacements to scrap the car with.
[Image: sig-3.jpg]
Reply
Thanks given by:
#6
ahh ffs

[Image: DSC_0190-Copy_zpsf093f84d.jpg]
Member of 99% warning or your nothing club!

Reply
Thanks given by:
#7
I'm interested in the wheels, front suspension and rear beam...

you got any idea on a price? and any room for a day of swapping bits over for when you need it scrapped? Smile
Reply
Thanks given by:
#8
Wind deflectors, how much Tongue ME WANT Big Grin

(29-10-2013, 08:04 PM)Dean Wrote: Wind deflectors, how much Tongue ME WANT Big Grin
And possibly the side skirts.

Any chance of posting? obviously i'll cover the cost.
Reply
Thanks given by:
#9
Ecu,bsi and key chip? Posted? Cash waiting Wink
[Image: av5ym8.jpg]
Reply
Thanks given by:
#10
Realllly want those wheels. No way it can be scrapped without replacements?
Reply
Thanks given by:
#11
(29-10-2013, 10:41 PM)Carlos182 Wrote: Realllly want those wheels. No way it can be scrapped without replacements?

A lot of people wont take them if it's not rolling because they'll damage the bed of their truck.. just throw together some with the right pcd's doesn't matter if they're not matching sizes etc
Reply
Thanks given by:
#12
Wimps. Never had one not take mine without axles ect. Straight swap for standard steelies one has puncture
TD04 11mm Sedan, now 2.1 vnt

Sedan Project http://306oc.co.uk/forum/thread-5763.html

Provence Dturbo Dead
Blaze 1.6 Dead
China 5dr '6 Death by cambelt failure
Matt White HDI estate Death by wiring
Sedan Dturbo aka triggers broom
Diablo estate Dturbo Living dead
Reply
Thanks given by:
#13
Will see how much cash I got spare after ph1 on road then I will make a bid with some steelies
Venetian XUD ph2 heaven
Ph3 perv cab heaven
Black ph1 XUD died

Moonstone hdi stage 2
Reply
Thanks given by:
#14
(30-10-2013, 08:34 AM)HDIkyle Wrote: Wimps. Never had one not take mine without axles ect. Straight swap for standard steelies one has puncture

Haha, that's how they all are down here anyway..
Reply
Thanks given by:
#15
Info in the exhaust? Size?

Could be interested
Reply
Thanks given by:
#16
passenger mirror assuming it's elecy, drivers door handle posted?
Reply
Thanks given by:
#17
So yeh how much for the wheels given replacements provided?
Diablo Hdi Dturbo and 205 1.9 project - it lives!
Reply
Thanks given by:
#18
Sorry just replying guys, working away and limited internet access. Looking at scrapping it this week before mot runs out. £200 plus replacement wheels takes the bandeds. Anything else you want make me an offer, but as I'm not there you'll have to come and take the parts off yourself, I can arrange for someone to be there.
[Image: sig-3.jpg]
Reply
Thanks given by:
#19
How wide are the banded steels?
[Image: 00000000-0000-0000-0000-00000000014E_zpsprynorkl.jpg]
Reply
Thanks given by:
#20
(04-11-2013, 09:11 PM)Craigus Wrote: How wide are the banded steels?

8J mate
[Image: sig-3.jpg]
Reply
Thanks given by:
#21
(04-11-2013, 09:59 PM)Dave26 Wrote:
(04-11-2013, 09:11 PM)Craigus Wrote: How wide are the banded steels?

8J mate

15"? and what size tyres?
[Image: 00000000-0000-0000-0000-00000000014E_zpsprynorkl.jpg]
Reply
Thanks given by:


Forum Jump:


Users browsing this thread: 3 Guest(s)