chris_90 106 derv project xsi rep, turbo NAD ;)

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
chris_90 106 derv project xsi rep, turbo NAD ;)
That fuel pipe would be more effective wrapped around the rad pipe a couple times, and it would also take some of the length out of it Wink
Doesnt even own a 306.
Reply
Thanks given by:
(01-10-2013, 10:04 PM)Tom Wrote: That fuel pipe would be more effective wrapped around the rad pipe a couple times, and it would also take some of the length out of it Wink

Yer I did that first time round but it kinked the pipe so took it off. Hopefully it's only temporary till I fix the standard housing anyway



Reply
Thanks given by:
Twist the pipe in your fingers as you go, will stop it from folding/kinking. Wink

The stock filter housing is a load of shit, i'd keep it like that myself.
306 HDi Deathtrap - 130bhp / 220lbft
...UPGRADING...



Reply
Thanks given by:
correct me if I am wrong though but the rad pipes will only get hot enough to transfer some heat to the fuel lines when the engine is so hot that the stat opens...which isnt very often on these.
the OEM housing starts heating as soon as engine makes heat
Wishes for more power...
Reply
Thanks given by:
(02-10-2013, 06:02 AM)Poodle Wrote: Twist the pipe in your fingers as you go, will stop it from folding/kinking. Wink

The stock filter housing is a load of shit, i'd keep it like that myself.

tbh im thinking of keeping it as it is but its if i run in to issues when its colder

(02-10-2013, 06:55 AM)Piggy Wrote: correct me if I am wrong though but the rad pipes will only get hot enough to transfer some heat to the fuel lines when the engine is so hot that the stat opens...which isnt very often on these.
the OEM housing starts heating as soon as engine makes heat

I have no idea piggy tbh but im not fussed tbh im running filtered waste oil and im surprised how thin it is and now ive sorted the air ingress issue its been bang on slight lumpy idle with 100% veg oil but soon as i drive it about a mile it sorts its self out so its all good, if needs be dont mind dropping a bit of derv in when its winter just to help it out abit but till it gets colder will have to see.


in other news
[Image: 106green175_zpsf2d82e73.jpg]
[Image: 106green174_zps16f5c5f1.jpg]

Big Grin



Reply
Thanks given by:
Saw this today. Cant believe how cool this thing really is Chris :-) needs the bbs reps back on though
#2 Moonstone Blue HDI
[Image: 6b0c7309-5184-463c-9f73-2a7b96601418_zpsfdf041fe.jpg]
Reply
Thanks given by:
(02-10-2013, 07:41 PM)kentiiboii Wrote: Saw this today. Cant believe how cool this thing really is Chris :-) needs the bbs reps back on though

I sold them Sad but knowing me will probably find some more shiny wheels next year. We'll as long as it goes though it's mot ok



Reply
Thanks given by:
So today springs come and i swapped them straight away so samass could have my old springs back asap

[Image: 106green177_zps9d3bfc97.jpg]
[Image: 106green176_zps36510971.jpg]

Wheely spec Wink
[Image: 106green178_zpsa7be47bb.jpg]

Next up is refurbished axle soon as ive saved up enough money.

Comments welcome



Reply
Thanks given by:
Fitted temp gauge

[Image: 106green180_zpsfa3bc526.jpg]
[Image: 106green179_zpsdb1fd499.jpg]

Not sure if its reading right tho as a couple of times last night it hit 120 in traffic (then fan kicked in) sits at 85/90 tho when driving not sure what the crack is with it tho.....

Comments welcome



Reply
Thanks given by:
I can't work out where that is you've mounted it too..?
306 HDi Deathtrap - 130bhp / 220lbft
...UPGRADING...



Reply
Thanks given by:
little dash panel to the right of steering wheel but before centre blowers!
my mrs has a dash dim control there.

120seems very high to be honest. shouldnt get that hot...my mrs 106nad never gets hot enough for the fans to kick in in traffic!
Wishes for more power...
Reply
Thanks given by:
(06-10-2013, 06:21 AM)Piggy Wrote: little dash panel to the right of steering wheel but before centre blowers!
my mrs has a dash dim control there.

120seems very high to be honest. shouldnt get that hot...my mrs 106nad never gets hot enough for the fans to kick in in traffic!

Thing is i dont no if the gauge is reading right or not, but i no i need a new radiator soon as mine is leaking ever so slightly so will get one soon and fit a new thermostat at same time so sure that will help it out.

Costing me a fortune this thing got a right list of things it needs Undecided

Glow plugs
Radiator
Thermostat
Front and rear brake pads
Rear axle
Rear shocks
washer jet pipe ( as arch guard deiced to fall out and pipe rubbed on tyre Angry )
Track rod ends/tracking

Thats all i can think of at min but im sure theres more, and its gotta be sorted before mot (december 2nd) gonna be skint thats for sure. Some times think is it worth while spending this much on it Undecided



Reply
Thanks given by:
Been at dyno day to day video here from first run was 59hp and 90'ish ftlbs torque will get exact figures another day.

https://www.youtube.com/watch?v=PfTD6hxP...ata_player

Turned Fuel down and second run pulled 61.5hp and 70ish ftlbs torque

https://www.youtube.com/watch?v=zxEE4aVr...ata_player

These figures arnt exact as no rev gauge



Reply
Thanks given by:
smokeyyy Big Grin
00' 106 Indy - Moonstone - Sold
97' 106 XT 1.6 - Mayerling Green - Swapped
95' 306 P1 DT - Onyx - Scrapped
97' 306 P2 DT - Silver - Scrapped
97' 306 P2 DT - Onyx - SORN awaiting scrap
Reply
Thanks given by:
wow thats smokey!! needs a turbo!!
Wishes for more power...
Reply
Thanks given by:
(12-10-2013, 03:02 PM)adamm306 Wrote: smokeyyy Big Grin

(12-10-2013, 03:07 PM)Piggy Wrote: wow thats smokey!! needs a turbo!!


Ha ha was turned down for the second run might turn it back up tho as loving the smoke Wink

Defo does need a turbo maybe one day i will do it lol



Reply
Thanks given by:
needs more air for all that fuel!
Wishes for more power...
Reply
Thanks given by:
(12-10-2013, 04:48 PM)Piggy Wrote: needs more air for all that fuel!

It's a he'll of a lot cleaner on Veg Oil....., any way defo more air like a turbo Wink ninja



Reply
Thanks given by:
Bit of an update picked another axle, decide that I would have a bash at refurbishing it my self. Any pay pics

[Image: DSC_0157_zps0eab7f4e.jpg]
[Image: DSC_0158_zpsb278e269.jpg]
[Image: DSC_0159_zps6e0a8a5d.jpg]
[Image: DSC_0160_zpsf6039fdb.jpg]
[Image: DSC_0161_zps94b04140.jpg]

So all stripped down ready for New bearings and some paint Smile pretty chuffed with my self as never managed to take an axle to bits before, but using my dad's strong arm thing made it pretty easy Big Grin

Comments welcome



Reply
Thanks given by:
Looks epic, but needs a blower. lol
Reply
Thanks given by:
turbo it Inlove
Reply
Thanks given by:
that strong arm jack thing looks amazing
Wishes for more power...
Reply
Thanks given by:
(22-10-2013, 08:53 PM)xdoddyx Wrote: Looks epic, but needs a blower. lol

(22-10-2013, 09:54 PM)clarkey2010 Wrote: turbo it Inlove

Maybe one day or maybe I won't not sure tbh just loving the reliability of it and if I strap a turbo to it I can grantee something will brake in a daily basis lol

(22-10-2013, 10:07 PM)Piggy Wrote: that strong arm jack thing looks amazing


It is handy but would recommend the next one up 20ton Jack as the 4 ton is good but could have done with that extra pressure when splitting the axle Smile



Reply
Thanks given by:
Pfft that's cheating get the sledge out!

Good work mate Smile
[Image: image_zps45f2003b.jpg]

Team Doesn't own a 306
Reply
Thanks given by:
(23-10-2013, 12:49 AM)Danny2009 Wrote: Pfft that's cheating get the sledge out!

Good work mate Smile

Ha Ha If cheating makes it easier im happy to cheat.... LOTS Wink lol I haven't got a sledge hammer either only a lump hammer so having the strong arm thing helped alot looking at buying my own now lol



Reply
Thanks given by:
Yea I think I may invest in one
[Image: image_zps45f2003b.jpg]

Team Doesn't own a 306
Reply
Thanks given by:
(23-10-2013, 11:16 AM)Danny2009 Wrote: Yea I think I may invest in one

Defo come in handy it's a body work tool apparently.

In other news bearing kits turn up today, gonna see if I can get some new offset washers and screws then I can start rebuilding it Smile



Reply
Thanks given by:
Used for rejigging chasis
Perv 106 1.4 xs First Pug Love - Scrapped
Perv 306 1.6 5 Door Hore - Sold
110bhp 207 Hdi Sport - Used as a Brake
173bhp T25 Ph1 Diablo Dturbo - Scrapped
Thirsty Bitch Volvo 850 Estate - Sold
51bhp Berlingo Nad DT Van - Sold
Slow as f*ck Dispatch Work Horse

www.prestige-auto-care.co.uk
Reply
Thanks given by:
Bit of an update, Ground all the rust of the axle tube and painted it up (no pics yet tho) and fitted the bearings to the trailing arms Smile

[Image: DSC_0167_zps5eae1cd2.jpg]
[Image: DSC_0169_zps524cfc00.jpg]
[Image: DSC_0170_zps4839f9ca.jpg]

Now just waiting for peugeot to get me some new offset washers and screws for the end of bars, then im saving for new shocks then it will be ready to put on Smile



Reply
Thanks given by:
Had some nice things bought to me today

[Image: DSC_0172_zps9ff8fbfa.jpg]
B4's

[Image: DSC_0173_zpsd552d621.jpg]
[Image: DSC_0174_zps01abe182.jpg]
[Image: DSC_0175_zps2501b37e.jpg]

New wheels won't be going on till next summer all though might sort Tyres so I got a decent set for mot.

Back axle was built then I f**k the threads up in the end of torsion bar so had to get a mate to take it to his work and fix it for me, all is good now can rebuild it back up hopefully be sorted tomorrow Smile

Comments welcome



Reply
Thanks given by:


Possibly Related Threads…
Thread Author Replies Views Last Post
  Peugeot 309 d turbo project adampug 30 14,288 04-12-2016, 10:03 AM
Last Post: adampug
  Chris_90's citroen zx volcane The END Chris_90 309 94,632 29-09-2015, 09:00 PM
Last Post: Chris_90
  Project Facelift Berlingo D Turbo Jamieh2013 11 6,007 21-03-2015, 05:01 PM
Last Post: Jamieh2013

Forum Jump:


Users browsing this thread: 39 Guest(s)