Breaking the meatwagon

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Breaking the meatwagon
#1
All prices are collected, postage would be extra.

Lots more other bits available, car is ready to be stripped as soon as so allow a day or two to remove parts. First come first served. Car is no longer being sold as a rolling shell so all parts to go.

Paypal preferred but fees to be added if not paying as gift.

Wheels:

16" staggered fitment banded steels. 9J front, 10J rear. I ran them with spacers which WILL need arch extensions, but may get away with them with no spacers. Fitted with nankang ns2 fronts with approx 5mm tread and Toyo T1-S rears with approx 3mm tread.
4x108
65.1mm centre bore, direct Peugeot fitment
£320+postage

25mm bolt on hubcentric wheel spacers with shortened head bolts to hub and studs and nuts to mount wheels £50

Engine/Transmission:

DHY bare block, approx. 100k miles £40 collected
Good condition head with new-ish glow plugs, cam, pulley and vacuum pump £30 collected
Phase 1 Nissens ally rad
90A Mitsubishi alternator £30 posted
6PK1145 aux belt, two weeks old £10 posted
Exide Premium 075TE battery, 12 months old, 600CCA, 60Ah. Full of beans, car starts first time every time £30 collected
Clutch assembly £30
Flywheel £20
DT gearbox £30
Miles’ Group N gear linkages (early non-adjustable version, all retaining clips present) £20
Compbrake style quickshifter inc. gear stick £20
GE gearbox-end quickshift £15
Driveshafts £10ea

Suspension

TA Technix coilies, new last month, new top mounts and bearings and both C spanners £130
Wishbones with good balljoints, 12 months old, £10ea
Hubs £15 ea (16mm ball joint, no ABS sensors)
GTi6 rear beam, refurbished 3 years ago, disc brakes, month old TA Technix rear shocks. Torsion bars are free enough to easily adjust ride height, currently rather low.. £170 with brakes, £150 without

Brakes:

302mm 307XSI180 front calipers and flexis with approx. 8 month old discs and pads, only done a couple of thousand miles £100
Rear calipers ok condition but need seals, passed handbrake efficiency at MOT fine. £30 the pair with discs and pads if they don’t go with the beam
GTi6 master cylinder, two port £15

Bodywork:

Not so sure what people will want, it’s a bit unique. Open to offers on any of it though

Interior:

Impreza Sport front seats £30
On/Off toggle switches £1ea
Leaf print leather rear bench (fits 5-door and estate) good condition with head rests £20
Estate folding parcel shelf, no sags, all locating lugs £10

Stereo:

12” sub and amp, nothing spectacular £30
Alpine Type S front coaxials £15

Pm me or mail me at stancewagon@gmail.com if you want anything


Attached Files Image(s)
                           
[Image: signature_zps1a02ba79.jpg]
Thanks given by:
#2
Wheels?
[Image: newsig_zpsee86fa10.jpg]
Thanks given by:
#3
Also wheels
Venetian XUD ph2 heaven
Ph3 perv cab heaven
Black ph1 XUD died

Moonstone hdi stage 2
Thanks given by:
#4
Can i have the inlet manifold please?
Thanks given by:
#5
NACA duct??
got an oil cooler??
Wishes for more power...
Thanks given by:
#6
You missed out the steering wheel. (I think)

How much for FMIC setup incl manifold, posted? Does that include filter to turbo piping too?
Thanks given by:
#7
Manifold is sold already

Wheels are £400 delivered inc tyres, but are part of the rolling shell deal being considered
[Image: signature_zps1a02ba79.jpg]
Thanks given by:
#8
ok mate. ill leave that one then.
[Image: newsig_zpsee86fa10.jpg]
Thanks given by:
#9
(21-10-2013, 07:37 PM)cwspellowe Wrote: Manifold is sold already

Wheels are £400 delivered inc tyres, but are part of the rolling shell deal being considered

what about what I asked for Smile
Wishes for more power...
Thanks given by:
#10
What colour are the impreza seats if the sale doesn't go through?
If the sale doesn't go through i'll have the seats, and the plasmas if you fancy posting..
Actually, where abouts are you? Might be easier to collect them when the car is sorted, but I can pay for them ASAP.
Thanks given by:
#11
Located up in Airdrie buddy, just east of Glasgow. Seats are prov sold pending payment. Can post the dials no bother though.

Piglet, no oil cooler, Naca duct is only one half of it, the frame you can see bolted to the bonnet
[Image: signature_zps1a02ba79.jpg]
Thanks given by:
#12
(21-10-2013, 07:46 PM)Piggy Wrote:
(21-10-2013, 07:37 PM)cwspellowe Wrote: Manifold is sold already

Wheels are £400 delivered inc tyres, but are part of the rolling shell deal being considered

what about what I asked for Smile

And me lol
Thanks given by:
#13
lol sorry mate. Say £100 posted for the fmic, pipes and a shitload of mikalor clamps?
[Image: signature_zps1a02ba79.jpg]
Thanks given by:
#14
(21-10-2013, 08:08 PM)cwspellowe Wrote: lol sorry mate. Say £100 posted for the fmic, pipes and a shitload of mikalor clamps?

Does that include piping for filter to turbo?
Thanks given by:
#15
(21-10-2013, 08:13 PM)bigcheez2k3 Wrote:
(21-10-2013, 08:08 PM)cwspellowe Wrote: lol sorry mate. Say £100 posted for the fmic, pipes and a shitload of mikalor clamps?

Does that include piping for filter to turbo?

Nope, just the intercooler side of the turbo
[Image: signature_zps1a02ba79.jpg]
Thanks given by:
#16
(21-10-2013, 08:15 PM)cwspellowe Wrote:
(21-10-2013, 08:13 PM)bigcheez2k3 Wrote:
(21-10-2013, 08:08 PM)cwspellowe Wrote: lol sorry mate. Say £100 posted for the fmic, pipes and a shitload of mikalor clamps?

Does that include piping for filter to turbo?

Nope, just the intercooler side of the turbo

Ah poo, I'll pass for now then as I should really concentrate on sorting a filter before an FMIC.
Thanks given by:
#17
Have you got a picture of seats incase they don't sell
Venetian XUD ph2 heaven
Ph3 perv cab heaven
Black ph1 XUD died

Moonstone hdi stage 2
Thanks given by:
#18
(21-10-2013, 08:02 PM)cwspellowe Wrote: Located up in Airdrie buddy, just east of Glasgow. Seats are prov sold pending payment. Can post the dials no bother though.

Well that isn't far from me mate since im in the North East.
If you don't get the payment for the seat i'll 100% have them and pay for them straight away, just need to find a day off work to come collect them.
If you find out let me know Smile
Thanks given by:
#19
Any pics of the plasma dials?
Thanks given by:
#20
Can I have the turbo for free, if I remove it myself this weekend?

Thanks x
Thanks given by:
#21
(21-10-2013, 09:30 PM)c.gerrard Wrote: Can I have the turbo for free, if I remove it myself this weekend?

Thanks x

Yep, there's a £250 entry fee to the garden though.
[Image: signature_zps1a02ba79.jpg]
Thanks given by:
#22
Btw i need your paypal address lol
Thanks given by:
#23
Do the alpine S's fit in the front door panels without modification etc, any pics of them please mate?
[Image: siggy1.jpg]

the smokey old bus that sounds like a tractor...
Thanks given by:
#24
How much for the front bumper?
[Image: fe6eddc8-1731-4100-a5fe-1edb853a88b6_zpseeacf928.jpg]
Thanks given by:
#25
First post updated, sale for the shell fell through so full car is being broken.

Sam, front bumper is no good mate, its trashed
[Image: signature_zps1a02ba79.jpg]
Thanks given by:
#26
Any of your crazy gear knobs going?
[Image: 20A1806D-891D-40FB-BD52-AD519177A607-734...391753.jpg]
TEAM CONROD SHITTING RALLYE!
Thanks given by:
#27
Nopes, my awesome Zilla one is now in the E36 and the rest were all binned lol
[Image: signature_zps1a02ba79.jpg]
Thanks given by:
#28
(21-10-2013, 09:46 PM)devils_fuel Wrote: Do the alpine S's fit in the front door panels without modification etc, any pics of them please mate?

^^ Smile
[Image: siggy1.jpg]

the smokey old bus that sounds like a tractor...
Thanks given by:
#29
Sorry missed that. Yeah they're a direct fit, coaxial speakers. No pics off hand but would only want £15 posted for them
[Image: signature_zps1a02ba79.jpg]
Thanks given by:
#30
(03-11-2013, 09:57 PM)cwspellowe Wrote: Sorry missed that. Yeah they're a direct fit, coaxial speakers. No pics off hand but would only want £15 posted for them

How old & what RMS are they? Very tempted Big Grin
[Image: siggy1.jpg]

the smokey old bus that sounds like a tractor...
Thanks given by:


Possibly Related Threads…
Thread Author Replies Views Last Post
  "Meatwagon" masks Ari 13 3,661 14-12-2013, 06:14 PM
Last Post: HDIkyle

Forum Jump:


Users browsing this thread: 2 Guest(s)