Megane RenaultSport 2.0 DCI175 **Back Boostin**

[CJ_Derv]

Yeah sounds about right a guy on forum had quote for 650 fitted with map to suit

[Scott]

need to look at bigger FMIC, bigger Blower and speak to rs about what else as id love to hit the 300hp mark if possible show the perv boys what torque is all about

Do it man, I'd love to see it making that kind of power!

[CJ_Derv]

Cant imagine what torque figuires would be we think about 340-350ish now after stage 2 on standard setup so with a bigger blower, solid flywheel and uprated stuff could be very high

[Scott]

Have you had much feedback about it/your plans on MS.net or RS.com? I don't often browse those forums (they're fairly quiet!) so wasn't sure if others have already been doing a lot of what you've got planned.

[Just Sean]

400nm is only 295ft/lbs I'd like to imagine a lot closer to 350/400ft/lbs tbh

[bigcheez2k3]

Yea... fcuk pikey tuning and chucking rods :d

Seem to be having a few niggly issues I see.... all good fun!! Be intresting to see how this progresses power wise

Im pretty sure its egr related now has to be as its got all its grunt but then bit laggy and been doing much research on the m9r engine and common faults on renault forum I got banned in less than 2 days has hundreds of problem threads all relating to the egr so gona clean it next week

:lo: How did you manage to get banned so quickly?

It's looking good, interested to see where this goes.

[CJ_Derv]

Have you had much feedback about it/your plans on MS.net or RS.com? I don't often browse those forums (they're fairly quiet!) so wasn't sure if others have already been doing a lot of what you've got planned.

No scott they seem fairly limited in the diesel side of things maybe I can bring them to life

---

400nm is only 295ft/lbs I'd like to imagine a lot closer to 350/400ft/lbs tbh

Who said nm :p

---

Yea... fcuk pikey tuning and chucking rods :d

Seem to be having a few niggly issues I see.... all good fun!! Be intresting to see how this progresses power wise

Im pretty sure its egr related now has to be as its got all its grunt but then bit laggy and been doing much research on the m9r engine and common faults on renault forum I got banned in less than 2 days has hundreds of problem threads all relating to the egr so gona clean it next week

:lo: How did you manage to get banned so quickly?

It's looking good, interested to see where this goes.

Well tbh I dont know apparently I was spamming via pms and hadbt posted in 3 days that was their reason when I actually hadnt sent any messages just had been looking through forum

[1616six]

400nm is only 295ft/lbs I'd like to imagine a lot closer to 350/400ft/lbs tbh

Was gonna say more like 400ft lbs surely?! I'm running 330ft lbs at 201bhp currently on standard blower

[Just Sean]

Dunno where I thought I saw nm!!

I'm smacked of my tits on pain killers atm tho!

[Scott]

Craig was that on Rs Megane?

[Ed Doe]

I think craig got on the wrong side of someone in a thread in the wanted section IIRC.... That the cause Craig?

[CJ_Derv]

Yea ft lbs I dont do nm lol hoefully it should be around same figuies as yours JJ

Haha no worrys sean I cud do with some mate

No scott and ed its called renaultforums or something not the two were on didnt even send anyrhing or do anything just got targeted by a keyboard warrior admin then too late banned haha

[Ruan]

You really don't want 400lb.ft in a FWD car...

You want to start easing off torque midrange to take strain off the driveline and keep the fuel injecting further up the revs...

[CJ_Derv]

Maybe so but I want a lot more torque than that tbh lol

[CJ_Derv]

So we have a few additions rim tape being one lol I like and its flourescent so looks ace at night

---

Havent been able to strip egr off as yet due to working and weather but used these following products cant recommend them enough !
Made a massive difference in performance and now makes me think a sensor or throttle sensor is at fault when it has its dicky moments




And have a fair few plans

Bigger turbo
Solid flywheel and uprated clutch
Remap up to about 300bhp with bigger blower
Rs tuning believes this to be achievable
Back box chop and new splitter and spoiler

[tim 306td]

this is going to be a beast

[Ed Doe]

You'll definitely need more than a backbox chop to support the 300hp buddy...

[CJ_Derv]

Interesting Ed. It should be enough for now but eventually need bigger ID and I didnt expect you to be such an expert in the dark side :p

[Scott]

I think he means that the standard exhaust is too restrictive for those gains, and merely chopping the backbox isn't likely to be enough to fix that, i.e. get a proper exhaust system

[CJ_Derv]

Oh no back box chops only for noise the DCI exhaust is ample for them figuires although I will be getting a full stainless wen I can afford one

[Piggy]

forte for the win.

hope peeps see why I rave about it and spit on redex now!

[CJ_Derv]

HID kit fitted piece of piss tbh, 20 mins each side wheel off arch liner out the way job done




And what a difference shame It started to rain and didnt change sidelights lol

[padge]

lovely motor mate, hids ftw.

[CJ_Derv]

lovely motor mate, hids ftw.

Cheers bud its finally getting there now stil loads I want to change and potentially loads more power to gain

[CJ_Derv]

Recent piccy

[Piggy]

Looks ace...

Wonder what it be like with the headlights masked...they seem to stick out a bit...as does the random silver wingmirror

[Craigus]

I dont like meganes but that actually looks quite smart

[Niall]

That looks mint. The front end of these look great but the back really just ruins it for me

[Jimbo]

Fairplay to this looks smart

And its derv so win win

[mikey b]

Looking good