Wanted: K!4 oil drain

[ginge191]

need K14 oil drain; not the hard line from the turbo, but the "flexy" rubber return.

If anyone has one, please let me know! many thanks, i'm sure a few of you have random pipe hanging around!

[Piggy]

I got a few but wouldnt know which it was...know how long it is?

[ginge191]

Was sure I replied to this...
Gah; it'll have a couple of bends, I'd say about 30cm long.
Send a picture if you could

[Piggy]

i'll go do that

[ginge191]

Thanks x

[Danny2009]

Guessing its the metal part of the drain that's held to the turbo with the 2 bolts? If so I have a few

[ginge191]

Sorry mate, as first post, not the hard line from the turbo

[Piggy]

was guna say...you were quite clear about it not being the hard line...

i have these hoses which all fit the hard line, so are correct inner diameter.

dont know if any are of any use??



the shortest pipe there is officially the rubber between the hard line and the sump. but you are obviously after something different!?

[ginge191]

That one on the far right of the pic. The slalom shape looks spot in. Would you measure the ID for me? I'll do the same. Won't be til tomorrow now. But looks ideal!

---

Actually, yeh, because that pipe on the right has one metal end which goes to sump return pipe with the other soft end going to the hard oil return on turbo. We may have a winner!!

[Danny2009]

Ahh my bad! Skim reading ftl

[Piggy]

That one on the far right of the pic. The slalom shape looks spot in. Would you measure the ID for me? I'll do the same. Won't be til tomorrow now. But looks ideal!

---

Actually, yeh, because that pipe on the right has one metal end which goes to sump return pipe with the other soft end going to the hard oil return on turbo. We may have a winner!!

well the inner diameter seems good coz it fits on a turbo oil outlet pipe sweet.
but theres no metal end, its soft both ends.
on the xud, I think theres a hard pipe coming from block for the pipe to go on to.
but someone correct me if Im wrong

[ginge191]

Yeh that small pipe you have comes from the block.. Hmm I may be able to find something to adapt it if its too short. That looks the best bends anywho. Price posted?

[Piggy]

fiver?!

[ginge191]

£4.95 and you got a deal! pm me