Posts: 71
Threads: 17
Joined: May 2013
Location: barry
Car Model/Spec: ph2 306 1.4 3 door
Thanks: 0
Given 0 thank(s) in 0 post(s)
im putting an aftermarket cone filter on my 306 thanks to dangti6 but want to put it tubed to the coldest area in the engine bay.
i was thinking mabey a oil catch tank was needed because im loosing the origonal air filter gubins. my question is am i right in thinking i need a oil catch tank for that breather pipe coming off the rocker, and what does it do exactly. as in does it filter the oil that comes out the breather pipe, does it hold the oil that comes thro meaning i have to do an oil change more frequently and service the catcher all the time . i honestly have no clue about them.
thanks :-)
Posts: 20,092
Threads: 591
Joined: Nov 2012
Reputation:
54
Location: Cotswolds
Car Model/Spec: Stage 13 16v HDi
Thanks: 22
Given 68 thank(s) in 68 post(s)
breather pipe filter should be fine...assuming you have the 1.4/1.6...?
there isnt enough pressure, due to no turbo, to worry about a oil catch tank
Posts: 71
Threads: 17
Joined: May 2013
Location: barry
Car Model/Spec: ph2 306 1.4 3 door
Thanks: 0
Given 0 thank(s) in 0 post(s)
Wicked thanks. Il order one today.
Posts: 111
Threads: 39
Joined: Jul 2012
Reputation:
1
Location: Gloucestershire
Car Model/Spec: 306 1.6
Thanks: 0
Given 0 thank(s) in 0 post(s)
I would recommend a catch tank as when I first got a aftermarket filter I didn't bother with catch tank my car then proceeded to shit oil all over my engine bay lol simple enough job to fit and all it does is catch excess oil instead of recirculating it in through the filter but up to you.
Posts: 20,092
Threads: 591
Joined: Nov 2012
Reputation:
54
Location: Cotswolds
Car Model/Spec: Stage 13 16v HDi
Thanks: 22
Given 68 thank(s) in 68 post(s)
shouldnt be needed on a little petrol, esp non turbo.
if its blowing oil out the breather, something aint right with your setup
Posts: 18,242
Threads: 386
Joined: Dec 2011
Reputation:
87
Location: Suffolk
Car Model/Spec: Focus Titanium
Thanks: 1
Given 118 thank(s) in 117 post(s)
TU's always blow oil through the breather, especially at high revs lol.....had 3 1.4s all the same so can't be a coincidence.
Posts: 20,092
Threads: 591
Joined: Nov 2012
Reputation:
54
Location: Cotswolds
Car Model/Spec: Stage 13 16v HDi
Thanks: 22
Given 68 thank(s) in 68 post(s)
they shouldnt surely?!
the splash plate under the rocker cover should completely avoid that
Posts: 18,242
Threads: 386
Joined: Dec 2011
Reputation:
87
Location: Suffolk
Car Model/Spec: Focus Titanium
Thanks: 1
Given 118 thank(s) in 117 post(s)
Don't think there's any sort of splash plate or baffle under there. It's been a few years now so can't really remember.
Posts: 14,208
Threads: 448
Joined: Dec 2011
Reputation:
51
Location: isle of wight
Car Model/Spec: Pov. Spec White '6
Thanks: 17
Given 18 thank(s) in 18 post(s)
Nope don't think there is a splash plate on there, well mine if mine ever did
TEAM CONROD SHITTING RALLYE!
Posts: 545
Threads: 42
Joined: Jun 2013
Reputation:
8
Location: basingstoke
Car Model/Spec: bone rattler 306...
Thanks: 0
Given 0 thank(s) in 0 post(s)
(09-08-2013, 09:19 PM)Toms306 Wrote: Don't think there's any sort of splash plate or baffle under there. It's been a few years now so can't really remember.
yes theres a splash plate under the rocker cover on a 1.4
(msg sent from hell)
If i dont c ya threw week ill c ya threw window.
Posts: 5,494
Threads: 202
Joined: Dec 2011
Reputation:
58
Location: Eastleigh
Car Model/Spec: S16 and HDi daily
Thanks: 2
Given 29 thank(s) in 28 post(s)
My 1.6 always blew oil from the breather, and the breather leaked so it was always a mess!
Welding and fabrication projects undertaken, contact me for more information.
Posts: 18,242
Threads: 386
Joined: Dec 2011
Reputation:
87
Location: Suffolk
Car Model/Spec: Focus Titanium
Thanks: 1
Given 118 thank(s) in 117 post(s)
09-08-2013, 09:53 PM
(This post was last modified: 09-08-2013, 10:06 PM by Toms306.)
(09-08-2013, 09:46 PM)pugjohn306 Wrote: (09-08-2013, 09:19 PM)Toms306 Wrote: Don't think there's any sort of splash plate or baffle under there. It's been a few years now so can't really remember.
yes theres a splash plate under the rocker cover on a 1.4
Hmm, maybe they removed it by phase 3 then? Cost cutting lol.
Well I was bored enough to check one of my old project threads.....so there is a baffle on the silver top 1.4s lol.
http://www.theywhoshallnotbenamed/forum/...ost1525816
But still, they all chuck oil through the breather lol.
Posts: 545
Threads: 42
Joined: Jun 2013
Reputation:
8
Location: basingstoke
Car Model/Spec: bone rattler 306...
Thanks: 0
Given 0 thank(s) in 0 post(s)
(09-08-2013, 09:53 PM)Toms306 Wrote: (09-08-2013, 09:46 PM)pugjohn306 Wrote: (09-08-2013, 09:19 PM)Toms306 Wrote: Don't think there's any sort of splash plate or baffle under there. It's been a few years now so can't really remember.
yes theres a splash plate under the rocker cover on a 1.4
Hmm, maybe they removed it by phase 3 then? Cost cutting lol.
Well I was bored enough to check one of my old project threads.....so there is a baffle on the silver top 1.4s lol.
http://www.theywhoshallnotbenamed/forum/...ost1525816
But still, they all chuck oil through the breather lol.
Lol i like the way someone says dont remove all ht leads at once as you can get confused as were they go..lol there all diffrent lengths and only an idiot would get em messed up lol....anyway...yes theres a baffle plate on the black tops too however mine dont chuck oil out it does what its suposed to and relive pressure in the head lol mabey im just lucky lol..
(msg sent from hell)
If i dont c ya threw week ill c ya threw window.
Posts: 20,092
Threads: 591
Joined: Nov 2012
Reputation:
54
Location: Cotswolds
Car Model/Spec: Stage 13 16v HDi
Thanks: 22
Given 68 thank(s) in 68 post(s)
yeah, thats it, I dont see why, if all is well of course, that it should blow oil out
Posts: 18,242
Threads: 386
Joined: Dec 2011
Reputation:
87
Location: Suffolk
Car Model/Spec: Focus Titanium
Thanks: 1
Given 118 thank(s) in 117 post(s)
Because its French...? French cars don't seem to like holding oil in my experience.
Posts: 545
Threads: 42
Joined: Jun 2013
Reputation:
8
Location: basingstoke
Car Model/Spec: bone rattler 306...
Thanks: 0
Given 0 thank(s) in 0 post(s)
(10-08-2013, 10:02 PM)Toms306 Wrote: Because its French...? French cars don't seem to like holding oil in my experience.
lol look after your car and your car wil do what you want it to lol
(msg sent from hell)
If i dont c ya threw week ill c ya threw window.
Posts: 18,242
Threads: 386
Joined: Dec 2011
Reputation:
87
Location: Suffolk
Car Model/Spec: Focus Titanium
Thanks: 1
Given 118 thank(s) in 117 post(s)
If only it worked like that lol.
For me it's fix one thing and another instantly breaks!
Posts: 71
Threads: 17
Joined: May 2013
Location: barry
Car Model/Spec: ph2 306 1.4 3 door
Thanks: 0
Given 0 thank(s) in 0 post(s)
lol. i only just got back to this thread. iv had a breather with filter on there for since i first mentioned it and iv had no issues yet. mabey when the oil starts getting to much it will change. but it seems okay for now.
Posts: 52
Threads: 5
Joined: Jun 2012
Car Model/Spec: 306
Thanks: 0
Given 0 thank(s) in 0 post(s)
my catch tank on a 1.4 gets filled up a lot I am not shore weather to keep emptying it or just leaving it full an help appreciated
Posts: 93
Threads: 9
Joined: Oct 2013
Thanks: 0
Given 0 thank(s) in 0 post(s)
11-10-2013, 04:13 PM
(This post was last modified: 11-10-2013, 04:20 PM by budd.)
(05-10-2013, 08:42 AM)Glen306 Wrote: my catch tank on a 1.4 gets filled up a lot I am not shore weather to keep emptying it or just leaving it full an help appreciated
empty it,
I'd recommend a catch tank if you are venting the breather to air, you can just run a pipe but if you having it venting under the bonnet you will smell the breather emissions / vapour in the cabin, the best method is a baffled tank located somewhere under the bonnet with the exit pipe venting out of the engine bay eg into the inner wing area this will stop you smelling the vapour, having a tank also allows you to keep an eye on what the engine is kicking out, lots of oil may suggest a problem, if you don't hae a tank to catch it you won't know how much oil is been thrown out.
I only seem to get a little water in mine (no oil), I hope is a normal byproduct of the internal combustion process, would you expect oil to be present on a XU with 83k on it?
|