13-02-2012, 11:00 AM
Here is a strut brace that will fit the dturbo with a top mount intercooler.
Genuine Dturbo with top mount Front strut Brace £45
|
13-02-2012, 11:00 AM
Here is a strut brace that will fit the dturbo with a top mount intercooler.
13-02-2012, 11:21 AM
wow, rocking horse shit . . . . .
Phase 1 D-Turdo, K14@24 psi, De-cat, meaty backbox, Bosch pump, grinded LDA pin, duel air fed K&N =133.7bhp & 188ft/lbs
13-02-2012, 11:34 AM
Does this actually clear the MC?? as I thought the DT ones that went round the top mount were LHD variations........
13-02-2012, 11:48 AM
Na I had one on my car when it first started out look at my thread.
13-02-2012, 11:49 AM
How many strut braces have you had lol?
This must be the 20th ive seen you selling! | Dyno Power Runs & Steady State Facilities Available, Just Ask Anytime |
| #DervMafia |
13-02-2012, 12:01 PM
Pompey306mark Wrote:Na I had one on my car when it first started out look at my thread. No worries, though I would ask, also, what Darren said
13-02-2012, 01:23 PM
SHOTGUN!
also, fancy giving it a respray before i grab it??
Diablo Hdi Dturbo and 205 1.9 project - it lives!
13-02-2012, 01:36 PM
Gutted. If ginge dont have it then send me paypal details and i will
Vehicle repair and servicing in the midlands pm for details
Current cars Subaru Impreza 2.0d - Daily 306 1.8 - track whore soon to be GTI6
13-02-2012, 01:38 PM
td_dan Wrote:Gutted. If ginge dont have it then send me paypal details and i will sorrrry
Diablo Hdi Dturbo and 205 1.9 project - it lives!
13-02-2012, 02:04 PM
What colour ginge? Will need sanding down first and try and get rid of the rust.
13-02-2012, 02:15 PM
Pompey306mark Wrote:What colour ginge? Will need sanding down first and try and get rid of the rust. have you still got that sigma blue, or any other odd blue colour would be awesome? Think this could cure your day to day boredoom temporarily loveee youuuuuu x
Diablo Hdi Dturbo and 205 1.9 project - it lives!
13-02-2012, 02:18 PM
I think I have some sigma if not, should have some of my car colour and my strut brace colour left.
Do you want to put the money in my PayPal. <!-- e --><a href="mailto:chivers9@hotmail.co.uk">chivers9@hotmail.co.uk</a><!-- e -->
13-02-2012, 02:19 PM
Ginge buy my lower strut brace too! Then youll have the b-road basher. Awesome handling
13-02-2012, 02:20 PM
gingey Wrote:Yeh mate, i get paid on wednesdays, alternatively i can give you cash on collection if you prefer??
Diablo Hdi Dturbo and 205 1.9 project - it lives!
13-02-2012, 02:20 PM
This is true he speaks the truth, ginge.
13-02-2012, 02:21 PM
And you should join the gaz coilovers group buy for a real b road badger.
13-02-2012, 02:21 PM
4WayDiablo Wrote:Ginge buy my lower strut brace too! Then youll have the b-road basher. Awesome handling ground clearence would be a bitch
Diablo Hdi Dturbo and 205 1.9 project - it lives!
13-02-2012, 02:23 PM
Na your got going lower than 50mm and mine is fine.
13-02-2012, 02:24 PM
I didnt see any speedbumps over there ginge. And its not that bad unless your on the floor anyway
13-02-2012, 02:30 PM
Go for both braces ginge it defo makes a big no massive difference! To the way they drive, mines lowered 40 I don't have a problem even had her airborne a few times, scratched it once down a farm lane with a big tractor rut down one side
13-02-2012, 02:34 PM
ok let me just jump into my endless pit of money :roll:
I'd like to have it all, phil, the lower brace will have to wait im afraid. and johnny, you have to meat to your bones, thus weigh nothing - oh and you have no seats and featherweight engine THUS making my car lower than your grannies nips 8-) but in all seriousness, i often have to cross ferrries and such what nots... already often proves a task at low tide...
Diablo Hdi Dturbo and 205 1.9 project - it lives!
13-02-2012, 02:38 PM
13 1/2 stone Iam plus the ferry won't be a problem as they rise with the wheels it's only if you got a lump in between them if you no what I mean
13-02-2012, 09:49 PM
Also mark, do i use the standard top mount bolts??
Diablo Hdi Dturbo and 205 1.9 project - it lives!
13-02-2012, 09:50 PM
You can do but I am sure I have some spare better bolts in the garage.
13-02-2012, 09:54 PM
ginge191 Wrote:Also mark, do i use the standard top mount bolts?? You could probably get away with the standard bolts, but it'd be best to get some 5mm loner ones to be on the safe side, especially considering how cheap 6 bolts will be. Also, I know you probably dont have the money for Gaz's, but just because somebody might be buying coilovers doesnt mean they have to be all the way down and really low, coilovers can usually go from standard height to like 100mm, so you wouldnt have to be on the floor
13-02-2012, 10:27 PM
Dan! Wrote:ginge191 Wrote:Also mark, do i use the standard top mount bolts?? any idea where i can get these from? :cry:
Diablo Hdi Dturbo and 205 1.9 project - it lives!
13-02-2012, 10:29 PM
My garage lol. Like I said.
13-02-2012, 10:34 PM
Pompey306mark Wrote:My garage lol. Like I said. lol sorry mate, i should really read the other threads, not just the last
Diablo Hdi Dturbo and 205 1.9 project - it lives!
20-02-2012, 10:13 PM
gingey Wrote:Yeh mate, i get paid on wednesdays, alternatively i can give you cash on collection if you prefer?? ..
Diablo Hdi Dturbo and 205 1.9 project - it lives!
29-02-2012, 12:17 PM
Ginge u still having this as your thinking of selling aint you? If not mark pm me and il take it as il paint it my self :grin:
Vehicle repair and servicing in the midlands pm for details
Current cars Subaru Impreza 2.0d - Daily 306 1.8 - track whore soon to be GTI6 |
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
New, genuine rear beam mount | RetroPug | 9 | 3,933 |
04-03-2018, 09:52 PM Last Post: RetroPug |
|
FOR SALE: GENUINE Pug front wind deflectors :) | Piggy | 30 | 7,667 |
14-11-2016, 11:13 AM Last Post: Piggy |
|
FOR SALE: Phase 1 DTurbo Sparco Strut Brace | Eeyore | 6 | 2,791 |
07-09-2016, 05:44 PM Last Post: bashbarnard |