266mm brake calipers and 22mm master cylinder

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Wanted: 266mm brake calipers and 22mm master cylinder
#1
As above looking for some good 266 calipers must be good condition with free bleed nipples, be nice if they come with good discs and pads??

Also need a 4 port 22mm master cylinder or something like that

What you got? Cheaper the better Wink

Pick up from pugfest or fcs would be best to save on postage



Reply
Thanks given by:
#2
I got some 266 front brakes. They came off a hdi and have good discs and pads. Just surface rust on the discs which will clean up with use. I will upload a pic later if your interested?
Reply
Thanks given by:
#3
Yer defo interested mate free bleed nipples? And you comeing to pugfest/fcs? How cheap are they Tongue



Reply
Thanks given by:
#4
got a 22mm ms, but its only 2 port
Reply
Thanks given by:
#5
(10-07-2013, 06:26 PM)zx_volcane Wrote: got a 22mm ms, but its only 2 port

Won't be any good for me thanks anyway



Reply
Thanks given by:
#6
Good man, they stop uber well in a nad lol

You do know you need to grind a bit of your carrier away to make them fit yes?
[Image: k6f9Fk]


Member of the 99% warning or you're nothing club
Reply
Thanks given by:
#7
(10-07-2013, 05:06 PM)Chris_90 Wrote: Yer defo interested mate free bleed nipples? And you comeing to pugfest/fcs? How cheap are they Tongue

I will check the bleed nipple. I will be going FCS and £20 no lower. Will load a pic up in a sec

[Image: null_zpscef2cae2.jpg]
Reply
Thanks given by:
#8
(10-07-2013, 08:07 PM)Frosty Wrote:
(10-07-2013, 05:06 PM)Chris_90 Wrote: Yer defo interested mate free bleed nipples? And you comeing to pugfest/fcs? How cheap are they Tongue

I will check the bleed nipple. I will be going FCS and £20 no lower. Will load a pic up in a sec


Ok mate will have them off you at fcs if bleed nipples are free



Reply
Thanks given by:
#9
I will check tomorrow and let you know
Reply
Thanks given by:
#10
(10-07-2013, 09:57 PM)Frosty Wrote: I will check tomorrow and let you know

Ok mate thanks



Reply
Thanks given by:
#11
Got the full brake setup off my hdi mate?
Reply
Thanks given by:
#12
(11-07-2013, 11:31 AM)tbaxter08700 Wrote: Got the full brake setup off my hdi mate?

Has it got 4 port master cylinder?



Reply
Thanks given by:
#13
you wont find a 4port from a 306 bud.
Wishes for more power...
Reply
Thanks given by:
#14
(11-07-2013, 05:39 PM)Piggy Wrote: you wont find a 4port from a 306 bud.

Ohhh you no we're I can get one from? Was tempted with 23mm but just don't want a solid pedal rather have a bit of feel to it



Reply
Thanks given by:
#15
duno much on the 106 scene....what about a 106 gti M/C?! is that 22mm?

I love my 23mm. awesome. with the 5.1 fluid and braided lines feels like you are actually in control.
Wishes for more power...
Reply
Thanks given by:
#16
The bleed nipples are all free mate. So you defo have them?
Reply
Thanks given by:
#17
(11-07-2013, 05:54 PM)Piggy Wrote: duno much on the 106 scene....what about a 106 gti M/C?! is that 22mm?

I love my 23mm. awesome. with the 5.1 fluid and braided lines feels like you are actually in control.

Might go for 23mm are 306 gti6 4 port?

(11-07-2013, 08:28 PM)Frosty Wrote: The bleed nipples are all free mate. So you defo have them?

Yer will have them mate pick up from fcs?



Reply
Thanks given by:
#18
yeah thats cool. Are you camping with oc?

also gti6 mc are 2 port. no standard mc is 4 port as far as im aware
Reply
Thanks given by:
#19
(11-07-2013, 08:47 PM)Frosty Wrote: yeah thats cool. Are you camping with oc?

also gti6 mc are 2 port. no standard mc is 4 port as far as im aware

I'm not Will be on 106 stand tho comeing down on the Saturday morning will inbox you my number when it's closer so I can meet you there some were to get them off you.

And ok there must some 4 port ones got that's what the 106 guys use have to look in to it abit more



Reply
Thanks given by:
#20
yeah no worries
Reply
Thanks given by:
#21
Wanting these asap if any one local got a set up that I can collect would be best????



Reply
Thanks given by:
#22
You should of has the 1s off me. Though I have still got them
Reply
Thanks given by:
#23
(04-08-2013, 07:32 PM)Frosty Wrote: You should of has the 1s off me. Though I have still got them

I've messaged you?? Before I bumped this up you not got it??



Reply
Thanks given by:
#24
(04-08-2013, 08:25 PM)Chris_90 Wrote:
(04-08-2013, 07:32 PM)Frosty Wrote: You should of has the 1s off me. Though I have still got them

I've messaged you?? Before I bumped this up you not got it??

Replied
Reply
Thanks given by:
#25
Still needing these



Reply
Thanks given by:
#26
have you considered getting a 106 gti MC which is two port and just plumb it with additional pipe work?
Wishes for more power...
Reply
Thanks given by:
#27
Chris ive got a good set of 266 callipers with discs and pads sitting in the shed that i will never use. Yours for £30 plus postage.
Team Eaton


1999 China Blue 306 GTi6 - Eaton Supercharged - 214.5bhp 181lbft
Reply
Thanks given by:
#28
Cant really compete with these but got some 266 calipers on there own in hammerite yellow id let go for 25 posted with fees covered?
Reply
Thanks given by:
#29
(05-08-2013, 09:52 AM)Piggy Wrote: have you considered getting a 106 gti MC which is two port and just plumb it with additional pipe work?

I have yes but tbh rather have a 22/23mm 4port to save the hassle, all though I have thought about a 23mm 2port and get some exact braided lines up with brake bias valve for rears so they don't lock up, bit not sure what that would cost

(05-08-2013, 11:38 AM)Niall Wrote: Chris ive got a good set of 266 callipers with discs and pads sitting in the shed that i will never use. Yours for £30 plus postage.

Depending on price on postage may be interested? And if the bleed nipples free?

(05-08-2013, 03:54 PM)Jaymes306 Wrote: Cant really compete with these but got some 266 calipers on there own in hammerite yellow id let go for 25 posted with fees covered?

I will keep that in mind thanks



Reply
Thanks given by:
#30
Postage will probably be about £10-15. Will weigh it all tomorrow for you Smile Also, the nipples were free last time they were used but they have sat for a few years. Cant see them seizing up though sitting in a dry shed!
Team Eaton


1999 China Blue 306 GTi6 - Eaton Supercharged - 214.5bhp 181lbft
Reply
Thanks given by:


Possibly Related Threads…
Thread Author Replies Views Last Post
  266mm calipers roland rat 5 3,005 10-10-2017, 01:48 PM
Last Post: roland rat
  Wanted: 23mm master cylinder Chris_90 8 2,749 28-05-2017, 04:29 PM
Last Post: Chris_90
  Wanted: 23mm 4 port master cylinder Chris_90 2 1,610 11-01-2017, 08:14 PM
Last Post: Chris_90

Forum Jump:


Users browsing this thread: 3 Guest(s)