Wanted: XUD Parts: engine/loom/hoses or Ph2 DT

[ginge191]

As titled, im after a few XUD parts - cash waiting

As an ongoing project, im starting a second engine for the 205, but need the 205 as a runner so i can't manage to take it off the road for any period of time to modify the current engine.

XUD 1.9 engine and gearbox

XUD Wiring loom

XUD Radiator hoses (primarily matrix and rad hoses)

Phase 2 sender unit

DT filler neck

DT downpipe exhaust/decat

Bosch pump as an optional extra.

ORRR

If anyone has a phase 2 DT they need rid off, happy to buy the whole lot

If anyone has anything going, please pm me asap

Can collect if local'ish

[Pompey306mark]

Could have my old engine and stuff. But I need the loom.

Also if not I have dumdum old engine, but needs head gasket.

[ginge191]

didn't your old block have head issues? also, what ancillaries are there?

[Piggy]

Hey ginge, beginning of september I will have all you need, loom, ancillaries, turbo, 11mm pump, pipework, the lot.

recent cambelt, very regularly service, needs head rebuild though as I wacked some headgasket sealer in there after a bodge job

[Danny2009]

I've got a engine loom if inhad known could have fetched it fcs!

Have a ph1 decat pipe too

[Piggy]

(inc engine, gearbox etc and a 10k mile old clutch in the box)

[ginge191]

sorry piggy; need this all before then! dang!

[Pompey306mark]

Yea it does have head issue's but I think you could re torque it for the time beginning. That's what I was going to do.

What's this engine for?

[ginge191]

sorry, not a risk taker with XUD's! would like a running lump with no issues.

new project