11-07-2013, 02:34 PM
Hi all probably a daft question but is there and kind of chip or something you can put in the cars ecu to get more power? or am I talking crap lol
1.4 power
|
11-07-2013, 02:34 PM
Hi all probably a daft question but is there and kind of chip or something you can put in the cars ecu to get more power? or am I talking crap lol
11-07-2013, 02:39 PM
Nope, nothing really. Any chip that claims to work... Really doesn't
![]() TEAM CONROD SHITTING RALLYE!
11-07-2013, 02:58 PM
Save your pennies for a DTurbo/gti6
If you're hell bent on the 1.4 then you'd probably have to look at turbos and supercharges.... Then it gets very expensive just to hit the power of a gti ![]()
11-07-2013, 03:04 PM
Stripped, cams, throttle bodies, lightened everything. Might just keep with a '6 lol
![]() TEAM CONROD SHITTING RALLYE!
11-07-2013, 03:08 PM
Drop a 1.6 106 GTI 16v lump in it. Turbo charge that. Could be fun
![]() ![]() Member of the 99% warning or you're nothing club 2000 Moonstone 1.8 Meridian - Sold 2000 China 3dr XS - Dead 1998 Diablo 3dr XSI
11-07-2013, 03:27 PM
Not much can be done on a small engine car, unless it come with a turbo from factory.
11-07-2013, 03:34 PM
(11-07-2013, 03:27 PM)underground375 Wrote: Not much can be done on a small engine car, unless it come with a turbo from factory. Doesn't need to come with it from factory, can quite easily slap a turbo on anything with enough knowledge/money/time ![]() TEAM CONROD SHITTING RALLYE!
11-07-2013, 04:22 PM
Cool cheers everyone. Iv got a gti6 but I'm not keen so going to flog it.. keeping hold of my little run around for now :-)
11-07-2013, 07:43 PM
Where's your '6? Pics?
![]() Member of the 99% warning or you're nothing club 2000 Moonstone 1.8 Meridian - Sold 2000 China 3dr XS - Dead 1998 Diablo 3dr XSI
11-07-2013, 10:52 PM
12-07-2013, 09:16 AM
As said above nothing you can do without spending £££
If you want to do some tuning and get some power but still hold onto sone reliabilty/mpg/sensible/good run around insurence flogg both your cars and get a hdi or XUD ![]()
12-07-2013, 09:21 AM
my 1.4 was/is 80.4hp yo! on standard unleaded 95 maybe 85 at a push on v power nitro +
12-07-2013, 11:18 AM
Yeah I'm looking at picking up a nice 3dr hdi once I get my gti6 sold on may even offer up a swaps :-) . Maybe get a remap or something :-)
12-07-2013, 06:32 PM
(12-07-2013, 09:21 AM)k3ogh Wrote: my 1.4 was/is 80.4hp yo! on standard unleaded 95 maybe 85 at a push on v power nitro + No.
Custom roll cages/shiny suspension bits/general fabrication work undertaken, PM me.
Top engine mount repair/reinforcement/chocking for cracked chassis and high powered cars, drive in, drive out, 2 hour turnaround.
17-07-2013, 11:50 PM
Seriously, you think there's magic fairies in V-power that suddenly add 5bhp?
...
Custom roll cages/shiny suspension bits/general fabrication work undertaken, PM me.
Top engine mount repair/reinforcement/chocking for cracked chassis and high powered cars, drive in, drive out, 2 hour turnaround.
18-07-2013, 06:00 AM
18-07-2013, 07:12 AM
18-07-2013, 07:14 AM
that and a 'turbo' sticker and you'll easily see 100bhp
Wishes for more power...
18-07-2013, 05:50 PM
18-07-2013, 08:40 PM
O shit i forgot to mention the sticker i need to add haha, maybe not 5 but vpower really makes a difference, you should try a tank of it i was impressed, im getting a extra 100 miles per tank, 600 odd
18-07-2013, 10:46 PM
I do run VPower, because I have to due to the compression bump.
Custom roll cages/shiny suspension bits/general fabrication work undertaken, PM me.
Top engine mount repair/reinforcement/chocking for cracked chassis and high powered cars, drive in, drive out, 2 hour turnaround.
19-07-2013, 06:01 AM
Pffft, I'm too tight to bother with fossil fuels these days. I try to use rapeseed oil though, as I reckon it produces more power than sunflower....
19-07-2013, 07:23 PM
(19-07-2013, 11:59 AM)Midnightclub Wrote: Does the 1.4 even have a knock sensor? Late ones have a crude one, early ones don't. It can't advance timing anyway, only retard it if it detects knock
Custom roll cages/shiny suspension bits/general fabrication work undertaken, PM me.
Top engine mount repair/reinforcement/chocking for cracked chassis and high powered cars, drive in, drive out, 2 hour turnaround.
19-07-2013, 08:31 PM
You'd probably loose a slight bit of power if anything, slower burn time.
Custom roll cages/shiny suspension bits/general fabrication work undertaken, PM me.
Top engine mount repair/reinforcement/chocking for cracked chassis and high powered cars, drive in, drive out, 2 hour turnaround. |
« Next Oldest | Next Newest »
|