Two sets of Cyclones and one set of Lasers

[DeeTurbo]

Hi,

I have the above forsale.

Set 1, the Cyclones have Goodyear F1 GSD3, 195/55/15 with couple of mil tread but one is punchard.





















I would like £70 but open to sensible offers.

-------------------------------------------------------------------------------------------------

Set 2, slightly better alloys, with two toyos and two pirelli. I think one of the Pirelli might have a puncture. I would say all the tyres on this set should be changed.















I would like £100 for this set.

---

Set 3, Lasers in good condition but all tyres need replacing.



















I would like £80 for this set.

[kingy]

good price. might get alot more on flea bay.

[DeeTurbo]

Yeah, I was thinking about sticking them on ebay but thought I'd stick them on here first. I was surprised when I checked that they're going for quite a bit on ebay.

The first set are the ones off my car originally. I took them off when I bought a cleaner set as a couple had corroded under the paint.

The second set I bought as I buckled one of my new ones but shortly after I bought them I found someone selling brand new one for £50 so bought that and that set have been sitting in my garage very since. Bought that set for £100 so I would just like that back.

The Lasers I bought for my girlfriends 206 but shes not too keen on them now.

[DeeTurbo]

Does any what to buy any of the sets as I'll be putting them up on ebay later?

[DeeTurbo]

I still have both sets of Cyclones.

Lasers now sold.

[puglove]

Did you really get £80 for lazers with shagges tyres?? I struggled at £50 with almost brand new tyres lol

[DeeTurbo]

Got £70 for them but the alloys are in good condition.

[puglove]

Feck me you done VERY well there then mate!

[DeeTurbo]

Don't they go for £100 and over on ebay?

[puglove]

Last couple people on here didn't even get scrap value for them on ebay recently, iv been watching cyclones with 2 good tyres go for around £75 on ebay the last few weeks (in ok ish cond) people are just getting tight. I remember when clones were like £300-350 on ebay back in the day

[tigerstyle]

Feck me you done VERY well there then mate!

Plus an hour of his time problem solving some smaller problems on my 306, MAF advice, gear/clutch advice/ HDi tips etc

Planning to get the lasers on mine in a few months!

[DeeTurbo]

Hi Adam,

Were you able to clean the MAF enough for it to read right?

I found the issue with my PP2000 unit. Bloody cheap leed going from the usb to the serial port on the unit has a dodgy cable.

[Matt]

Christ that's a lot!! I am seeing the right alloys in those pictures yeah?

[DeeTurbo]

I said I was open to offer as well.

How would you price them up?