Posts: 29
Threads: 1
Joined: Dec 2011
Thanks: 0
Given 0 thank(s) in 0 post(s)
as Ruan mentioned do it as a shed project i recon you could do it for £600 providing you could get away without having to remap the ecu if that even possible on a 1.4 as ive never owned one
chop and weld a flange on the standard manifold
make up a downpipe
t2
oil return
intercooler and pipes
pipes for water feed and return
pipe for water return
run it on low boost say 5 - 7 psi i wouldnt risk going any higher without some research
you main problem would be to get the right fuel to air mix to stop your pistons melting as a lean mixture extends the combustion duration thus higher temperatures if i understand it correctly.
plus if that works ok at a later date you could always swap the parts over to a 1.6 to get that little bit more power.
by all means if im talking complete bollocks say as im speaking in theory and dont want to be responsible for cocking this up for him if he does go ahead
Posts: 8,019
Threads: 374
Joined: Dec 2011
Reputation:
38
Location: Isle of Wight
Car Model/Spec: GTI 6
Thanks: 8
Given 16 thank(s) in 14 post(s)
OR for £16, get one of these badboys!
Posts: 2,672
Threads: 22
Joined: Dec 2011
Reputation:
0
Location: North Petherton
Car Model/Spec: 306 1.4
Thanks: 0
Given 0 thank(s) in 0 post(s)
Finally someone on my side haha. It would be quality if done!
Posts: 19,854
Threads: 581
Joined: Dec 2011
Reputation:
195
Location: Bournemouth
Car Model/Spec: Supercharged 306 GTi6
Thanks: 36
Given 82 thank(s) in 78 post(s)
ginge191 Wrote:OR for £16, get one of these badboys!
I might actually buy one of these one day just for a laugh!
Team Eaton
1999 China Blue 306 GTi6 - Eaton Supercharged - 214.5bhp 181lbft
Posts: 5,847
Threads: 169
Joined: Dec 2011
Reputation:
91
Location: South London
Car Model/Spec: 2003 Jaguar S-Type Sport 3.0V6
Thanks: 1
Given 1 thank(s) in 1 post(s)
I wouldnt, youd probably end up with bits of exploded plastic in your engine... lol
![[Image: car-1.jpg]](http://i1117.photobucket.com/albums/k591/grant-306/car-1.jpg)
Member of the 99% warning or you're nothing club
2000 Moonstone 1.8 Meridian - Sold
2000 China 3dr XS - Dead
1998 Diablo 3dr XSI
Posts: 19,854
Threads: 581
Joined: Dec 2011
Reputation:
195
Location: Bournemouth
Car Model/Spec: Supercharged 306 GTi6
Thanks: 36
Given 82 thank(s) in 78 post(s)
Grant Wrote:I wouldnt, youd probably end up with bits of exploded plastic in your engine... lol
Yeah be good while it lasted though!
Team Eaton
1999 China Blue 306 GTi6 - Eaton Supercharged - 214.5bhp 181lbft
Posts: 2,672
Threads: 22
Joined: Dec 2011
Reputation:
0
Location: North Petherton
Car Model/Spec: 306 1.4
Thanks: 0
Given 0 thank(s) in 0 post(s)
Dont think it would actually work though would it?
Posts: 19,854
Threads: 581
Joined: Dec 2011
Reputation:
195
Location: Bournemouth
Car Model/Spec: Supercharged 306 GTi6
Thanks: 36
Given 82 thank(s) in 78 post(s)
Foxy-jim Wrote:Dont think it would actually work though would it?
Let's put it this way, if they worked well, more people would use them lol
Team Eaton
1999 China Blue 306 GTi6 - Eaton Supercharged - 214.5bhp 181lbft
Posts: 2,672
Threads: 22
Joined: Dec 2011
Reputation:
0
Location: North Petherton
Car Model/Spec: 306 1.4
Thanks: 0
Given 0 thank(s) in 0 post(s)
Exactly, im happy with my supra induction kit haha.
Posts: 1,833
Threads: 91
Joined: Dec 2011
Reputation:
12
Location: Wrexham
Car Model/Spec: 306 D Turbo
Thanks: 0
Given 0 thank(s) in 0 post(s)
Foxy-jim Wrote:Dont think it would actually work though would it?
I dont see why a good motor couldn't be used to turn a supercharger, it would remove any mounting/belt issues.
Supercharged XUD Project - Dead
Posts: 2,672
Threads: 22
Joined: Dec 2011
Reputation:
0
Location: North Petherton
Car Model/Spec: 306 1.4
Thanks: 0
Given 0 thank(s) in 0 post(s)
Its not a supercharger...
Posts: 1,833
Threads: 91
Joined: Dec 2011
Reputation:
12
Location: Wrexham
Car Model/Spec: 306 D Turbo
Thanks: 0
Given 0 thank(s) in 0 post(s)
Foxy-jim Wrote:Its not a supercharger...
I know that's not but why couldn't you run an Eaton M45 (mini supercharger) using an electric motor, in theory it would spin it up quicker than the car could using the engine, just use some sort of throttle sensor to tell the motor when and how much to spin.
Supercharged XUD Project - Dead
Posts: 1,950
Threads: 55
Joined: Dec 2011
Reputation:
17
Location: Rotherham
Car Model/Spec: 406 V6
Thanks: 3
Given 10 thank(s) in 10 post(s)
Because of the immense amount of current you would need to draw to power the thing - at 12 volts, you'd have cables as thick as your thumb.
Custom roll cages/shiny suspension bits/general fabrication work undertaken, PM me.
Top engine mount repair/reinforcement/chocking for cracked chassis and high powered cars, drive in, drive out, 2 hour turnaround.
Posts: 2,672
Threads: 22
Joined: Dec 2011
Reputation:
0
Location: North Petherton
Car Model/Spec: 306 1.4
Thanks: 0
Given 0 thank(s) in 0 post(s)
I think if there was a better way to set it up, it would have been done by now!
Posts: 1,748
Threads: 41
Joined: Dec 2011
Reputation:
12
Location: Midlands
Car Model/Spec: Dtractor
Thanks: 0
Given 6 thank(s) in 6 post(s)
Im loving this project, its almost XUD spec, bolt on turbo and see what she does! 
Get a regulator and wind the fuel pressure up rather than getting ECU management, My friend did that with his saxo vtr, I thought he would melt a piston or something, he was running 10lb from a T25 that was literally just bolted onto the front but he ended up shitting a rod, so if you did something similar but ran less boost. This is the first thing I would do if I had a petrol.... get a turbo on it...
Posts: 2,672
Threads: 22
Joined: Dec 2011
Reputation:
0
Location: North Petherton
Car Model/Spec: 306 1.4
Thanks: 0
Given 0 thank(s) in 0 post(s)
The rods on the TU engines are really weak!
Posts: 4,926
Threads: 266
Joined: Dec 2011
Reputation:
18
Location: Somerset
Car Model/Spec: 205 DTurbo
Thanks: 73
Given 7 thank(s) in 7 post(s)
I'd like to see this done, something a bit different!
Would be amazing if it out did a stage 1'd XUD too.. 
Posts: 2,672
Threads: 22
Joined: Dec 2011
Reputation:
0
Location: North Petherton
Car Model/Spec: 306 1.4
Thanks: 0
Given 0 thank(s) in 0 post(s)
Posts: 1,950
Threads: 55
Joined: Dec 2011
Reputation:
17
Location: Rotherham
Car Model/Spec: 406 V6
Thanks: 3
Given 10 thank(s) in 10 post(s)
silverzx Wrote:Would be guaranteed to out do a stage 1'd XUD too..
Fixed.
Custom roll cages/shiny suspension bits/general fabrication work undertaken, PM me.
Top engine mount repair/reinforcement/chocking for cracked chassis and high powered cars, drive in, drive out, 2 hour turnaround.
Posts: 490
Threads: 24
Joined: Dec 2011
Reputation:
1
Location: Chesterfield
Car Model/Spec: 530i Sport/306 Rallye
Thanks: 0
Given 1 thank(s) in 1 post(s)
*Runs off to ebay to find a cheap ph1 XS*
Black 306 Rallye
Topaz Blue E39 530i Sport
Nordic Green 406 1.9TD
Posts: 4,926
Threads: 266
Joined: Dec 2011
Reputation:
18
Location: Somerset
Car Model/Spec: 205 DTurbo
Thanks: 73
Given 7 thank(s) in 7 post(s)
Rippthrough Wrote:silverzx Wrote:Would be guaranteed to out do a stage 1'd XUD too..
Fixed.
Haha, surprised you haven't done this yet MrRipp! 
Posts: 7,347
Threads: 163
Joined: Dec 2011
Reputation:
53
Location: Leeds
Car Model/Spec: 406 HDI
Thanks: 0
Given 18 thank(s) in 15 post(s)
Yeah, I'd love to see a 3 cylinder 1050cc turbo 306
Posts: 774
Threads: 44
Joined: Dec 2011
Reputation:
7
Location: Herefordshire
Car Model/Spec: Miami 205 TD
Thanks: 0
Given 0 thank(s) in 0 post(s)
Not sure if this has been mentioned, but there are 500+bhp 106 GTi turbo's out there, and even higher abroad. Also, there's even a 1.1 turbo on youtube and IIRC @ 6 PSi it pulled ~140bhp?
I say do it, I would definately do it personally 
Posts: 2,672
Threads: 22
Joined: Dec 2011
Reputation:
0
Location: North Petherton
Car Model/Spec: 306 1.4
Thanks: 0
Given 0 thank(s) in 0 post(s)
Posts: 29
Threads: 1
Joined: Dec 2011
Thanks: 0
Given 0 thank(s) in 0 post(s)
heres an ebay auction that might be of interest if your still thinking of doing this upto £100 so far with t28 turbo, manifold, intercoller & pipes, modified sump, dump valve and oil catch tank .
http://www.ebay.co.uk/itm/Peugeot-106-c ... _500wt_898
Posts: 4,193
Threads: 117
Joined: Jan 2012
Reputation:
21
Location: in the pub
Car Model/Spec: needs bwarrrp.
Thanks: 0
Given 1 thank(s) in 1 post(s)
Posts: 774
Threads: 44
Joined: Dec 2011
Reputation:
7
Location: Herefordshire
Car Model/Spec: Miami 205 TD
Thanks: 0
Given 0 thank(s) in 0 post(s)
Posts: 19,854
Threads: 581
Joined: Dec 2011
Reputation:
195
Location: Bournemouth
Car Model/Spec: Supercharged 306 GTi6
Thanks: 36
Given 82 thank(s) in 78 post(s)
Pugmarshall Wrote:This one's nippy (106 GTi)
http://www.youtube.com/watch?v=-40i5n86 ... re=related
That's no normal 106. That's Colin's 400bhp one I think!
Team Eaton
1999 China Blue 306 GTi6 - Eaton Supercharged - 214.5bhp 181lbft
Posts: 774
Threads: 44
Joined: Dec 2011
Reputation:
7
Location: Herefordshire
Car Model/Spec: Miami 205 TD
Thanks: 0
Given 0 thank(s) in 0 post(s)
yeah it's Colin from ATSpeed's, 410bhp IIRC? I know it's not normal OR cheap lol but it's inspiration for the OP!
Posts: 19,854
Threads: 581
Joined: Dec 2011
Reputation:
195
Location: Bournemouth
Car Model/Spec: Supercharged 306 GTi6
Thanks: 36
Given 82 thank(s) in 78 post(s)
Pugmarshall Wrote:yeah it's Colin from ATSpeed's, 410bhp IIRC? I know it's not normal OR cheap lol but it's inspiration for the OP!
It is inspiration. It's a f*cking monster that thing! He put a vid of it going around Nuremberg and it just didn't stop! (until the gear linkage fell off!)
Team Eaton
1999 China Blue 306 GTi6 - Eaton Supercharged - 214.5bhp 181lbft
|
![[Image: Foxy2.jpg]](http://i1224.photobucket.com/albums/ee369/Foxy-jim/Foxy2.jpg)
![[Image: 22f2b6b2-758b-4c1c-96fb-6fa9c6059b13_zpsf306b56b.jpg]](http://i585.photobucket.com/albums/ss299/Ha11elujaz0rs/22f2b6b2-758b-4c1c-96fb-6fa9c6059b13_zpsf306b56b.jpg)
![[Image: signature.png]](http://s22.postimg.org/cgh3ss11t/signature.png)
![[Image: tapatalk_1427020983519_zpsnwvozlhb.jpeg]](http://s768.photobucket.com/user/annegg5511/media/Mobile%20Uploads/tapatalk_1427020983519_zpsnwvozlhb.jpeg.html)
![[Image: newsig_zpsee86fa10.jpg]](http://s1215.photobucket.com/user/kingy1975/media/newsig_zpsee86fa10.jpg.html)