clutch to high

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
clutch to high
#1
hi guys i have recently had a new clutch, cable and gearbox fitted. since doing this ive noticed my clutch is near the top. is there any way to get it further down on the pedal?.
cheers guys
Venetian XUD ph2 heaven
Ph3 perv cab heaven
Black ph1 XUD died

Moonstone hdi stage 2
Reply
Thanks given by:
#2
Slam the clutch to the floor a few times should sort out the auto adjust
[Image: SDC10442-1.jpg]
Reply
Thanks given by:
#3
Auto adjust or manual adjust?

IIRC cheapo clutch cables are manual adjust.
(16-05-2016, 10:45 AM)Toms306 Wrote: Oh I don't care about the stripped threads lol, that's easily solved by hammering the bolt in. Wink
Nanstone GTD5 GT17S - XUD9TE
Volvo V50 D5 R-Design SE Sport - Daily cruise wagon.
Reply
Thanks given by:
#4
ok cheers. im not sure if its auto or manual adjust. when i fitted the cable there was a spring on the pedal that i took off and havent put it back on. is that adjuster?
Venetian XUD ph2 heaven
Ph3 perv cab heaven
Black ph1 XUD died

Moonstone hdi stage 2
Reply
Thanks given by:
#5
The auto adjuster is near the clutch lever arm.
Stage 2 XUD Sedan
Reply
Thanks given by:
#6
(19-07-2012, 07:27 PM)strictly_derv Wrote: The auto adjuster is near the clutch lever arm.

ah ok mate. ill try what jonny B says then hopefully it will be sorted Smile
Venetian XUD ph2 heaven
Ph3 perv cab heaven
Black ph1 XUD died

Moonstone hdi stage 2
Reply
Thanks given by:
#7
Does the clutch cable have a threaded part and a nut hanging off the end of it where it attaches to the gearbox?

If not and it has a big plastic concertina bit clipped to the subframe, that's your auto adjuster...
(16-05-2016, 10:45 AM)Toms306 Wrote: Oh I don't care about the stripped threads lol, that's easily solved by hammering the bolt in. Wink
Nanstone GTD5 GT17S - XUD9TE
Volvo V50 D5 R-Design SE Sport - Daily cruise wagon.
Reply
Thanks given by:
#8
(19-07-2012, 10:06 PM)Ruan Wrote: Does the clutch cable have a threaded part and a nut hanging off the end of it where it attaches to the gearbox?

If not and it has a big plastic concertina bit clipped to the subframe, that's your auto adjuster...

ye there is like a black block that clips onto the subframe that i can remember. will look tomorrow and get a pic
Venetian XUD ph2 heaven
Ph3 perv cab heaven
Black ph1 XUD died

Moonstone hdi stage 2
Reply
Thanks given by:


Possibly Related Threads…
Thread Author Replies Views Last Post
  High idle & Low clutch Smiley69 9 2,921 24-09-2012, 08:24 PM
Last Post: andywhy

Forum Jump:


Users browsing this thread: 2 Guest(s)