10-10-2021, 08:32 PM
(This post was last modified: 10-10-2021, 08:38 PM by pug306driver.)
So, cut the 4 wires going to the switch plug.
2 wires to each terminal in the plug, marked 1 and 2.
Soldered and insulated long tails to each pair of 2 wires and tested. Will do same to the 4 loom wires, and the tails will connect up in the Speedo area.
Refitted plug to switch and tested.
All ok so far, acid test will be when dash back together and powered up.
Since the terminal came away from the he switch easily I conclude it was not on properly. I have not removed the dash but can see evidence it's been off before....
Please God let it be just a poor connection thats now fixed.....
2 wires to each terminal in the plug, marked 1 and 2.
Soldered and insulated long tails to each pair of 2 wires and tested. Will do same to the 4 loom wires, and the tails will connect up in the Speedo area.
Refitted plug to switch and tested.
All ok so far, acid test will be when dash back together and powered up.
Since the terminal came away from the he switch easily I conclude it was not on properly. I have not removed the dash but can see evidence it's been off before....
Please God let it be just a poor connection thats now fixed.....
