30-10-2018, 10:18 AM
(This post was last modified: 30-10-2018, 10:18 AM by pug306driver.)
The lad has one of those now, a 1.8 petrol picasso one sadly.
Looking underneath they look quite similar to a 306 ish.
New P bushes sorted a slight knock from the l/h/side front for ours but that side has had a strip down for a new wheel bearing some weeks ago, so the strut etc got a strip down and repaint as well. The top bearing and rubbers where all good etc..
As to your knock noise, wheel bearing ok, end of rack ok, rack ok ?
Could even be the inner metal tube in the front rubber bush on the t/c/a moving, its clamped via the bolt, even that could move in a worn hole ??
Subframe to body tight and not cracked ??
Looking underneath they look quite similar to a 306 ish.
New P bushes sorted a slight knock from the l/h/side front for ours but that side has had a strip down for a new wheel bearing some weeks ago, so the strut etc got a strip down and repaint as well. The top bearing and rubbers where all good etc..
As to your knock noise, wheel bearing ok, end of rack ok, rack ok ?
Could even be the inner metal tube in the front rubber bush on the t/c/a moving, its clamped via the bolt, even that could move in a worn hole ??
Subframe to body tight and not cracked ??