13-07-2018, 10:20 PM
306 wiring loom for the engine. Plug and play that way. Phase 2 xud clocks for.rev counter
Different elbow for.the turbo as turbo points different direction In 405
Downpipe
You also have to pull the gearbox pin and swap for the xud one. Also you'll probably need a different clutch cable due to pull Vs push type clutch.
Rad you can get away with but wouldn't advise. Try and get an xud rad as they're thicker.
Also ps
We don't think any engine swaps are silly here we've seen most of them. I believe piggys 2.1 started life as a 1.4
Sent from my FIG-LX1 using Tapatalk
Different elbow for.the turbo as turbo points different direction In 405
Downpipe
You also have to pull the gearbox pin and swap for the xud one. Also you'll probably need a different clutch cable due to pull Vs push type clutch.
Rad you can get away with but wouldn't advise. Try and get an xud rad as they're thicker.
Also ps
We don't think any engine swaps are silly here we've seen most of them. I believe piggys 2.1 started life as a 1.4
Sent from my FIG-LX1 using Tapatalk
On a break from 306oc for personal reasons. If anyone needs or wants me most of you have my number and or facebook messenger
Thanks for the good times guys n gals. I might be back. Who knows.
Thanks for the good times guys n gals. I might be back. Who knows.