29-07-2015, 10:45 PM
Ive been wanting to build a manifold for a good while now and to test my self with what im capable to do and to add it to my belt. So my friend that i share a workshop with went out and bought a vnt turbo for his already stage 2 hdi and asked me to make it "fit"
First of i fabricated a mount to sit on the gearbox
Ive since angled the turbo over to have the oil feed level.
Next we got some face plates cut from the water cutters in stainless and ordered a load of mandrel bends.
This is where i am atm with it. 32mm primaries then into a collector to 40mm secondaries is the plan.
No way is it perfect but i hope it will have a good out come, Is as equal as i can get it with good clearance. Im now awaiting on more tube to hopefully finish it all off. All comments welcome
Stef
First of i fabricated a mount to sit on the gearbox
Ive since angled the turbo over to have the oil feed level.
Next we got some face plates cut from the water cutters in stainless and ordered a load of mandrel bends.
This is where i am atm with it. 32mm primaries then into a collector to 40mm secondaries is the plan.
No way is it perfect but i hope it will have a good out come, Is as equal as i can get it with good clearance. Im now awaiting on more tube to hopefully finish it all off. All comments welcome
Stef
90' 205 gti6 supercharged
05' Evo 9 IX GT
Team eaton.
Axle rebuilds please contact me for your needs.
https://www.facebook.com/axlesbystef/
05' Evo 9 IX GT
Team eaton.
Axle rebuilds please contact me for your needs.
https://www.facebook.com/axlesbystef/