03-05-2012, 06:04 AM
Connor and I changed both p bushes and wheelbearing on my car last sat...easy-peasy
Take out the arm, cut the rubber bush out and then hacksaw the remaining shaft off the arm (don't cut in to the arm), then bang on the new bush using an old bush to hit it on square..the beatch was getting the bolts through the bush/anti roll bar again!
They cost me £9 each side from GSF
Edit - read tractors first post, that's what we did!
Connor - your guide would come in handy now
Take out the arm, cut the rubber bush out and then hacksaw the remaining shaft off the arm (don't cut in to the arm), then bang on the new bush using an old bush to hit it on square..the beatch was getting the bolts through the bush/anti roll bar again!
They cost me £9 each side from GSF
Edit - read tractors first post, that's what we did!
Connor - your guide would come in handy now
![[Image: siggy1.jpg]](http://i653.photobucket.com/albums/uu252/crissy_boy/Cars/siggy1.jpg)
the smokey old bus that sounds like a tractor...