Yeah i know its the torsion bars that set the height..
I literally had to raise the arm by 5mm maybe less to line the hole up tho with no force onto the ARB splines. But i have read on other guides that really you need to raise the arms slightly anyway to allow everything to be free rather than under pressure.
No thats what i done originally i set the pieces of wood in with both measurements correct between holes and found the spot for both torsion bars to fit in on the right splines, then put the wheels back on to find the o/s was well off for some reason yet n/s was perfect..
Now ive raised the o/s by literally one spline round and it seems higher now than the n/s
But only higher by what the pictures show
I literally had to raise the arm by 5mm maybe less to line the hole up tho with no force onto the ARB splines. But i have read on other guides that really you need to raise the arms slightly anyway to allow everything to be free rather than under pressure.
No thats what i done originally i set the pieces of wood in with both measurements correct between holes and found the spot for both torsion bars to fit in on the right splines, then put the wheels back on to find the o/s was well off for some reason yet n/s was perfect..
Now ive raised the o/s by literally one spline round and it seems higher now than the n/s
But only higher by what the pictures show