19-06-2012, 05:03 PM
hi been working on my car today noticed a problem ie i cant lower the tickover down at all when its warm its about 1100 what i have also noticed is that you can move the throtle lever from the antistall screw about 1cm before the revs start to go up. i have removed the cold start cable still high revs i have undone the hot tickover screw at the back of the pump still high revs i cant find any other way at lowering the revs at all? i would of thought with the 1cm of play i have on the throtle lever from leaving the antistall screw to the revs start changing 1cm about if i undone all the tickover screws it would of cut out?
this is a na bosch pump never been touched before only removed the armour from it a couple of days ago any ideas guys
edit i have wound out the max fuel screw to the point the tickover lowers but then it wont rev up? so i wound it back in to where it was for now as i had marked the screw.
this is a na bosch pump never been touched before only removed the armour from it a couple of days ago any ideas guys
edit i have wound out the max fuel screw to the point the tickover lowers but then it wont rev up? so i wound it back in to where it was for now as i had marked the screw.