Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
How to fit a gti inlet manifold to a 1.816v / 2.016v
#30
Niall Wrote:
SRowell Wrote:8mm = fuel feed/Green connector
6mm = fuel return/white connector. Do not get these mixed up!)

I swear mine are the other way round :/ Ive definitely got 8mm on the white connector which seems to be feeding the fuel :/

Could be mate seeing as my car had been messed with a fair bit!

yeh my upper most pipe is the white connector which goes into the upper connector of the gti fuel rail.

Also advice to anyone reading this thread looking to do this mod. My leaking used to be fromt eh jubilee clips not being done up tight enough... However i put new ones on today and fuel started pissing out. Turns out the inner metal tail of the jubilee clip had been forced through the pipe when i tightened it up really tight! Ive been through several clips now as the screws always seem to be complete shite so i really recommend you get decent ones on the first place!
Reply
Thanks given by:


Messages In This Thread
Re: How to fit a gti inlet manifold to a 1.816v / 2.016v - by Eeyore - 10-06-2012, 10:08 PM

Forum Jump:


Users browsing this thread: 1 Guest(s)