11-05-2012, 10:36 PM
Depends what your plans are really...
I would say your overcoming a fairly worn clutch, but a td04 opened up will ra*e a stock clutch...
I was making 220hp on a stock clutch, with no problems at all, but was running a bit turbo, and all the power was between 4000-5500rpm, so torque was relitivly low, whereas you are likely to ra*e the clutch on a td04 at just 180-190ho due to the much greater torque...
Tbh for your application on the the CG paddles would be fine, I ran my CG paddle hard as hell for 12 months,never missed a beat once warm / got RAPED, there cheap, and not the best, but will more than handle all a td04 can throw at it...
I would say your overcoming a fairly worn clutch, but a td04 opened up will ra*e a stock clutch...
I was making 220hp on a stock clutch, with no problems at all, but was running a bit turbo, and all the power was between 4000-5500rpm, so torque was relitivly low, whereas you are likely to ra*e the clutch on a td04 at just 180-190ho due to the much greater torque...
Tbh for your application on the the CG paddles would be fine, I ran my CG paddle hard as hell for 12 months,never missed a beat once warm / got RAPED, there cheap, and not the best, but will more than handle all a td04 can throw at it...
| Dyno Power Runs & Steady State Facilities Available, Just Ask Anytime |
| #DervMafia |
| #DervMafia |