07-05-2012, 10:13 PM
Hey fellas, seriously contemplating swapping out the D2's for another brand of coilover. My problem is that, while they ride fine (having been on a friend's GTI6) they just aren't great for major lows. They're completely bottomed out at about 60-70mm so with camber and stretched tyres there's too much arch gap for my liking.
If I were to exchange these with someone, I would be keeping the adjustable top mounts. I would be happy to do a swap though for someone else's coilover bodies minus their top mounts.
These have adjustable dampening and spring rate appears to be roughly 350lb so on the stiffer side. Unfortunately I never got C-spanners with them and have been adjusting the collars using water pump pliers. The damper bodies wind down in the lower sleeve to adjust height and keep the same damper travel. Overall they're in good nick, having never been actually driven on the estate and only covered about 6k miles that i'm aware of.
Anyone interested?
If I were to exchange these with someone, I would be keeping the adjustable top mounts. I would be happy to do a swap though for someone else's coilover bodies minus their top mounts.
These have adjustable dampening and spring rate appears to be roughly 350lb so on the stiffer side. Unfortunately I never got C-spanners with them and have been adjusting the collars using water pump pliers. The damper bodies wind down in the lower sleeve to adjust height and keep the same damper travel. Overall they're in good nick, having never been actually driven on the estate and only covered about 6k miles that i'm aware of.
Anyone interested?
![[Image: signature_zps1a02ba79.jpg]](http://s1128.photobucket.com/user/martypellowe/media/signature_zps1a02ba79.jpg.html)