02-04-2020, 04:43 PM
If you're getting spark it means the side of the relay that powers the fuel pump is good as it also provides power to the ignition coils.
You haven't mentioned that you've checked you have power on both sides of the relevant fuse (F35). After that I'd check the wiring integrity between the pump & the plug for the relay.
If you decide to hot wire the pump don't forget to include an inline fuse (10amp).
I've PM'd you btw.
You haven't mentioned that you've checked you have power on both sides of the relevant fuse (F35). After that I'd check the wiring integrity between the pump & the plug for the relay.
If you decide to hot wire the pump don't forget to include an inline fuse (10amp).
I've PM'd you btw.