31-10-2018, 08:07 AM
That most definitely needs sorting. Try tapping a thin screwdriver under the nut while turning to remove it, or may be possible to get a nut splitter on it.
Getting the bolt out might then be your issue. Mine was corroded in place n only managed to apply enough heat n force to remove it once the hub was off the car. A garage with an acetalene torch could probably sort it in 5 mins. Just check the hub is undamaged.
Getting the bolt out might then be your issue. Mine was corroded in place n only managed to apply enough heat n force to remove it once the hub was off the car. A garage with an acetalene torch could probably sort it in 5 mins. Just check the hub is undamaged.