07-05-2017, 07:42 PM
Having a look at your pics i have a few suggestions.
You still have both hot and cold idle screws, certainly the hot one can go and will allow you to add more fuel and bring the idle down.
You also still have the minimum throttle stop screw and its out a turn or 2, again, remove this entirely and again it'll drop the idle and let you bring the fuel up. Likewise you can remove the bit that hits the minimum throttle stop from the arm with a grinder so you have even further minimum travel.
I might be mistaken but your lines look like they are only 8mm, upgrade to 10mm with a proper sized filter. The outlet from the tank is 10mm on the 306.
You still have both hot and cold idle screws, certainly the hot one can go and will allow you to add more fuel and bring the idle down.
You also still have the minimum throttle stop screw and its out a turn or 2, again, remove this entirely and again it'll drop the idle and let you bring the fuel up. Likewise you can remove the bit that hits the minimum throttle stop from the arm with a grinder so you have even further minimum travel.
I might be mistaken but your lines look like they are only 8mm, upgrade to 10mm with a proper sized filter. The outlet from the tank is 10mm on the 306.