19-02-2017, 12:57 PM
(02-02-2017, 06:45 PM)cully Wrote: been busy today managed to remove the bulkhead, all the internal side panels,
and all the secondary loom, but I'm struggling with the roof rails some kind person nut and bolted them through the roof onto load spreader plates inside,
I'm having to adapt the spreader plates inside with some Rivnuts to enable me to use the rails again if needed,
as i wont be able to get to the nuts when a new roof is fitted inside.
also making good and water proofing all the existing drilled holes in the roof
spreader plates with added rivnuts
sealing the roof holes with the use of Tap washers and silicon sealant
looking a lot larger inside now!
![[Image: 20170202_195120.jpg]](http://smg.photobucket.com/user/cully/media/vivaro/20170202_195120.jpg.html)
![[Image: 20170202_195101.jpg]](http://smg.photobucket.com/user/cully/media/vivaro/20170202_195101.jpg.html)
![[Image: 20170202_195204.jpg]](http://smg.photobucket.com/user/cully/media/vivaro/20170202_195204.jpg.html)
Ah, so that's where all the NHS blue totes keep disappearing to........
Cherry Red Rallye - Full on OEM resto.....