been busy today managed to remove the bulkhead, all the internal side panels,
and all the secondary loom, but I'm struggling with the roof rails some kind person nut and bolted them through the roof onto load spreader plates inside,
I'm having to adapt the spreader plates inside with some Rivnuts to enable me to use the rails again if needed,
as i wont be able to get to the nuts when a new roof is fitted inside.
also making good and water proofing all the existing drilled holes in the roof
spreader plates with added rivnuts
![[Image: 20170202_195120.jpg]](http://img.photobucket.com/albums/v159/cully/vivaro/20170202_195120.jpg)
sealing the roof holes with the use of Tap washers and silicon sealant
![[Image: 20170202_195101.jpg]](http://img.photobucket.com/albums/v159/cully/vivaro/20170202_195101.jpg)
looking a lot larger inside now!
![[Image: 20170202_195204.jpg]](http://img.photobucket.com/albums/v159/cully/vivaro/20170202_195204.jpg)
and all the secondary loom, but I'm struggling with the roof rails some kind person nut and bolted them through the roof onto load spreader plates inside,
I'm having to adapt the spreader plates inside with some Rivnuts to enable me to use the rails again if needed,
as i wont be able to get to the nuts when a new roof is fitted inside.
also making good and water proofing all the existing drilled holes in the roof
spreader plates with added rivnuts
![[Image: 20170202_195120.jpg]](http://smg.photobucket.com/user/cully/media/vivaro/20170202_195120.jpg.html)
sealing the roof holes with the use of Tap washers and silicon sealant
![[Image: 20170202_195101.jpg]](http://smg.photobucket.com/user/cully/media/vivaro/20170202_195101.jpg.html)
looking a lot larger inside now!
![[Image: 20170202_195204.jpg]](http://smg.photobucket.com/user/cully/media/vivaro/20170202_195204.jpg.html)
https://www.check-mot.service.gov.uk/
GTI6 Info
Don’t drive faster than your guardian angel can fly.