25-01-2017, 10:42 AM
Can either re-program immo + RF locking to the new BSI/CPH whatever you want to call it or swap the maps over. Remember that the RF locking and the immo system are totally different.
3rd party diags may be able to do it, but you'll probably need the security code to be able to do it, same as PP2k.
If the ECU part numbers are the same (0 281 0xx xxx), you should be good to simply put the correct BSI/CPH with the correct ECU and download the map off one and apply it to the other. If not, then the adjustments that have been made will need to be applied to the software version that is on your original ECU.
3rd party diags may be able to do it, but you'll probably need the security code to be able to do it, same as PP2k.
If the ECU part numbers are the same (0 281 0xx xxx), you should be good to simply put the correct BSI/CPH with the correct ECU and download the map off one and apply it to the other. If not, then the adjustments that have been made will need to be applied to the software version that is on your original ECU.
