19-01-2017, 04:56 PM
(This post was last modified: 19-01-2017, 04:56 PM by Spoonaltap.)
Mine are the 18mm balljoints even tho my pug is an older PH3, I know this cos the bottom arms I ordered came with 16mm ones which fall out the bottom of the hub even if you have a bolt in it so they're right. Didn't start right away, it's passed it's mot a couple of months ago and started doing this 2 maybe 3 weeks ago but I would say yet it's probably something I've changed.
I've had the cold the last few days so I've not had a proper chance to look at it but I have jacked it up and had a quick look, the engine doesn't rocked when I try to move it and all nuts and bolts are tight. I was hoping I'd see something obvious like a bolt missing. Wheel nuts are tight and there is no movement in wheel when I rock it side to side or top to bottom.
Appreciate everyone's help, if I can't find the issue with it I'll get it into a garage and see if they can find what's wrong with it.
I've had the cold the last few days so I've not had a proper chance to look at it but I have jacked it up and had a quick look, the engine doesn't rocked when I try to move it and all nuts and bolts are tight. I was hoping I'd see something obvious like a bolt missing. Wheel nuts are tight and there is no movement in wheel when I rock it side to side or top to bottom.
Appreciate everyone's help, if I can't find the issue with it I'll get it into a garage and see if they can find what's wrong with it.
