28-09-2016, 07:45 PM
angle of engine in the 307 is different, to get the box to sit nicely and lift the shafts away from the subframe you may be better to tilt the engine up forwards to match.
driveshafts need shortening, use the ml6 rear internediate bearing carrier.
clutch and flywheel needs to be from ml6.
use a 206 master cylinder and mount it to the 306 pedal box, easier than making the 307 master fit. rest can be 307.
fit the 307 gear cable setup.
driveshafts need shortening, use the ml6 rear internediate bearing carrier.
clutch and flywheel needs to be from ml6.
use a 206 master cylinder and mount it to the 306 pedal box, easier than making the 307 master fit. rest can be 307.
fit the 307 gear cable setup.
need a part number? http://public.servicebox.peugeot.com/ and http://service.citroen.com/ will sort you out.