06-04-2016, 06:13 AM
(This post was last modified: 06-04-2016, 06:15 AM by Magenta Sunset.)
(03-04-2016, 05:10 PM)Dum-Dum Wrote: Measured the hubs, between the outer edge of diagonally opposed studs is 124mm and between the inner edges of the same studs is 104mm so the stud pattern is 4x114mm or more likely 4x4.5"
I knew it was outside of the range that is common on 4 stud wheels LOL
(03-04-2016, 02:28 PM)Orta Wrote: I've wanted a little trailer like this for a while as well. How have you found driving with it?
Not fun when its empty as it bounces and tugs about but once it's got a couple hundred kilos in it's solid. I have the brakes locked off so haven't tried it braked yet.
It's easy enough to reverse but any turn isn't one turn of the wheel, it's left right left and that's every time you want to change the direction of the trailer when you are going backwards.
consider getting an anti-snake kit fitted. I did, much better behaved - less airborne over bumps.
" home from derby at 80ish. "
I hope that's kph you're quoting - - -
It goes, it stops (as reqd). 
Hate Housework!
Hate Housework!