20-03-2016, 08:34 PM
Work has got in the way, so I have not yet had time to get under the car and get my hands dirty.
I manager to get some data from pp2000 (first time user).
When I communicated with the ecu for the first time, there were faults present, but sorry I cleared those. I thought I had pressed F2 to save the screen of faults, but apparently not. There were no codes, just descriptions.
No ecu engine faults have re-appeared since, and I have cranked the engine loads of times.
The following data was obtained during cranking over with no firing. Does it look ok?
![[Image: 200316-306hdi.jpg]](http://www.bedroom-workshop.com/306/200316-306hdi.jpg)
I manager to get some data from pp2000 (first time user).
When I communicated with the ecu for the first time, there were faults present, but sorry I cleared those. I thought I had pressed F2 to save the screen of faults, but apparently not. There were no codes, just descriptions.
No ecu engine faults have re-appeared since, and I have cranked the engine loads of times.
The following data was obtained during cranking over with no firing. Does it look ok?