18-03-2016, 12:33 PM
go for a slightly longer belt as its tight on the tensioner
the tensioner needs to move tighter and more loose
ive since changed to 6PK1110ES
to relocate the pas to the lower sump position you will need a conversion kit
the pas pump will not just bolt up to the sump
you will also have to rotate the oil feed into the pump so it points up to the tanknot down to the floor
the tensioner needs to move tighter and more loose
ive since changed to 6PK1110ES
to relocate the pas to the lower sump position you will need a conversion kit
the pas pump will not just bolt up to the sump
you will also have to rotate the oil feed into the pump so it points up to the tanknot down to the floor
https://www.check-mot.service.gov.uk/
GTI6 Info
Don’t drive faster than your guardian angel can fly.