01-03-2016, 07:57 PM
Buy yourself a 1 or 2 metres length of something like 35mm2 welding cable - will be ample (pun intended) for your requirements.
You can cut this to length and crimp in the ring terminals, or if you have some plumbing solder and a blowtorch you can solder them in.
You'll need ring terminals to suit m8 bolts - so circa 8mm diameter. the bolts on the gearbox are m8, I forget what is on chasis, but can't be too dissimilar.
End of the day its nothing more complicated than a bit of wire, and going big diameter will be belt and braces, length doesn't have to be too accurate as plenty of space for it to flap about without too much concern
You can cut this to length and crimp in the ring terminals, or if you have some plumbing solder and a blowtorch you can solder them in.
You'll need ring terminals to suit m8 bolts - so circa 8mm diameter. the bolts on the gearbox are m8, I forget what is on chasis, but can't be too dissimilar.
End of the day its nothing more complicated than a bit of wire, and going big diameter will be belt and braces, length doesn't have to be too accurate as plenty of space for it to flap about without too much concern
![[Image: avatar_zpstlcgvhg8.jpg]](http://img.photobucket.com/albums/v363/toastmonster/avatar_zpstlcgvhg8.jpg){kind=avatar}