04-12-2015, 12:03 PM
in theory if you add a resistive pressure sensor to pin 19 on the engine loom plug at the chassis leg
you should get a reaction to the oil temp gauge on the dash.....
IF THE WIRES TO THE DASH HAVE BEEN INSTALLED IN THE STD LOOM
if the gauge reacts quick enough to boost change that's another problem
you should get a reaction to the oil temp gauge on the dash.....
IF THE WIRES TO THE DASH HAVE BEEN INSTALLED IN THE STD LOOM
if the gauge reacts quick enough to boost change that's another problem
https://www.check-mot.service.gov.uk/
GTI6 Info
Don’t drive faster than your guardian angel can fly.