30-09-2015, 01:16 AM
No you dont have to take the whole door off!!!!! You only have to take the door card off! Start by taking off the triangular mirror shroud then take the armrest off 2x 8mm hex or star driver!then the interior door handle plastic sorround which pops off from the front to the rear(do it in reverse and you'll break the front clip!!!
The door card pops off from the bottom edge near the sill and has 3 or 4 pop clips along the bottom and a couple more on each side!
Once you've done the speaker make sure you clip the long metal runner/ guide that runs the length of the top of the door card back on to it's channel on the top of the door skin/window runner/seal, and at the same time make sure you line up the lock button rod with the lock button hole befor you scre the armrest back on and replace the handle shroud!
The door card pops off from the bottom edge near the sill and has 3 or 4 pop clips along the bottom and a couple more on each side!
Once you've done the speaker make sure you clip the long metal runner/ guide that runs the length of the top of the door card back on to it's channel on the top of the door skin/window runner/seal, and at the same time make sure you line up the lock button rod with the lock button hole befor you scre the armrest back on and replace the handle shroud!
