Right had an issue with my wipers. The other day my wipers jammed into each other and burnt the motor out. So replaced the motor and linkage and all was well. Then today, I jumped in and put the wipers onto the first click. They went up but then on way back down they were clicking the relay and stopping 2 or 3 times before parking, sometimes not parking at all.
On normal or fast speed they are fine. If I just click the wiper stalk down to clear the screen, all ok if I hold it down but if I just flick it once it here's going down again and they relay is clicking. I swapped the relay for the other green one at the side and it's same.
Could this be a stalk issue?
It's a 99 t reg with auto wipers
Oh and the relay gets hot
Thanks
On normal or fast speed they are fine. If I just click the wiper stalk down to clear the screen, all ok if I hold it down but if I just flick it once it here's going down again and they relay is clicking. I swapped the relay for the other green one at the side and it's same.
Could this be a stalk issue?
It's a 99 t reg with auto wipers
Oh and the relay gets hot
Thanks