03-09-2015, 03:05 PM
I've had new mains and big-ends turn up also the red plastigauge
ive been out and fitted the new mains to the block and plastigauged them all 5 main bearings
they have all come back to 0.076mm on the plastigauge
so if the tollerance for the bearings is 0.040 - 0.100 i would say the mains are within tolerance
now to do the same with the Big-ends
ive been out and fitted the new mains to the block and plastigauged them all 5 main bearings
they have all come back to 0.076mm on the plastigauge
so if the tollerance for the bearings is 0.040 - 0.100 i would say the mains are within tolerance
now to do the same with the Big-ends
https://www.check-mot.service.gov.uk/
GTI6 Info
Don’t drive faster than your guardian angel can fly.