03-08-2015, 08:31 AM
Small update with this - i went to see Alex from Mapped out remapping who was an extremely nice guy, knowledgeable, polite, friendly and all round had plenty of time for me and my car. Would highly recommend.
I was aiming for 260bhp/350nm from a map which he said was not an issue.
![[Image: 0jm0vIy.jpg]](http://i.imgur.com/0jm0vIy.jpg)
The service requested was a before map rolling printout and an after roll prinout
The first pre-map rolling printout came back @ 228bhp/300nm which we were both surprised by, thinking nothing more of it than the couple of existing mods adding a few bhp, we carried on.
When he got the car, he took the existing map off for security so it could be put back to 'standard' after if needed.
He got a standard map and began to work his magic. He uploaded this back onto the car and we took another run- it lost bhp and gained torque.
He was extremely stumped.
After being confused, comparing maps, speaking to colleagues for am hour or so he had no explanation other than a mechnical fault in the car.
I had a quick chat to Ruan who suggested it could be a sensor somewhere in the car - the car was fully scanned for errors etc and nothing came up.
Alex said, the existing "standard" map had already been played with after comparing to the OE map. I requested it to stay as it was then - his words were that "it's an aggressive map" which i don't particularly mind; it's harsh, pokey and quite suits my style of driving. The car still responds extremely well, produces reliable MPG and suits my style. Alex had no issue with this so reverted it back and profusely apologised - not that it's his fault!
So, plans from here - begin replacing various sensors and injectors until i notice and OOMPH as the current map Alex said should already be producing the stated figures of 260bhp/350nm
In the pipeline i have a r26r spoiler still waiting for me to fit as i believe it's ready for collection
I've ordered a set of roof bars to carry my surf board
And next few weeks I should have my box delete on the back end!
Any other ideas as to what i could look at , please throw it in
I was aiming for 260bhp/350nm from a map which he said was not an issue.
The service requested was a before map rolling printout and an after roll prinout
The first pre-map rolling printout came back @ 228bhp/300nm which we were both surprised by, thinking nothing more of it than the couple of existing mods adding a few bhp, we carried on.
When he got the car, he took the existing map off for security so it could be put back to 'standard' after if needed.
He got a standard map and began to work his magic. He uploaded this back onto the car and we took another run- it lost bhp and gained torque.
He was extremely stumped.
After being confused, comparing maps, speaking to colleagues for am hour or so he had no explanation other than a mechnical fault in the car.
I had a quick chat to Ruan who suggested it could be a sensor somewhere in the car - the car was fully scanned for errors etc and nothing came up.
Alex said, the existing "standard" map had already been played with after comparing to the OE map. I requested it to stay as it was then - his words were that "it's an aggressive map" which i don't particularly mind; it's harsh, pokey and quite suits my style of driving. The car still responds extremely well, produces reliable MPG and suits my style. Alex had no issue with this so reverted it back and profusely apologised - not that it's his fault!
So, plans from here - begin replacing various sensors and injectors until i notice and OOMPH as the current map Alex said should already be producing the stated figures of 260bhp/350nm
In the pipeline i have a r26r spoiler still waiting for me to fit as i believe it's ready for collection
I've ordered a set of roof bars to carry my surf board
And next few weeks I should have my box delete on the back end!
Any other ideas as to what i could look at , please throw it in
Diablo Hdi Dturbo and 205 1.9 project - it lives!