22-04-2015, 09:11 AM
how much power are you running / are you running silly low on the front?
Meyle Hd should be more than enough for a decent set of lower arms, guaranteed for 4 years too - I'm saying this despite ruining the p-bushes, but I am running a lot of torque through the front.
I'd avoid anything from ebay, and even from some motorfactors like ecp, gsf, carparts4less ..etc
I've had not so cheap pattern parts from big motorfactors fail - pbush pin snapping off for example was not great news.
If you're running lower than say 30/40mm you prob want to adjust the p-bush angle anyway as there will more strain on them in their standard orientation.
Meyle Hd should be more than enough for a decent set of lower arms, guaranteed for 4 years too - I'm saying this despite ruining the p-bushes, but I am running a lot of torque through the front.
I'd avoid anything from ebay, and even from some motorfactors like ecp, gsf, carparts4less ..etc
I've had not so cheap pattern parts from big motorfactors fail - pbush pin snapping off for example was not great news.
If you're running lower than say 30/40mm you prob want to adjust the p-bush angle anyway as there will more strain on them in their standard orientation.
![[Image: avatar_zpstlcgvhg8.jpg]](http://img.photobucket.com/albums/v363/toastmonster/avatar_zpstlcgvhg8.jpg){kind=avatar}