26-01-2015, 09:53 PM
Yes it should sit on the stop screw. If you tighten up the actuator arm a little so it sits on the stop with no boost and it'll come on boost earlier.
If that still isn't boosting early enough you can let the stop screw out by a quarter or half a turn at a time.
As Ruan says don't have the stop screw too far out, a quarter turn makes a HUGE difference to where that turbo comes on boost but I had it running so the turbo was well on boost by 2000rpm.
If that still isn't boosting early enough you can let the stop screw out by a quarter or half a turn at a time.
As Ruan says don't have the stop screw too far out, a quarter turn makes a HUGE difference to where that turbo comes on boost but I had it running so the turbo was well on boost by 2000rpm.