30-12-2014, 06:31 PM
It depends on how you want to control it and what type of actuator you have.
If you wanna keep it simple you can use a boost actuator off an old turbo to push the vanes open at higher boost levels to control the boost level
If you wanna control it properly then you need to build an Ardunio ECU and fit a load of sensors
This is how to do it using a boost can.
https://www.youtube.com/watch?v=QtqfNFnnps4
If you wanna keep it simple you can use a boost actuator off an old turbo to push the vanes open at higher boost levels to control the boost level
If you wanna control it properly then you need to build an Ardunio ECU and fit a load of sensors
This is how to do it using a boost can.
https://www.youtube.com/watch?v=QtqfNFnnps4